Altium Designer Documentation

ExtendSelectionColumnToBottomOfWindow

Created: July 27, 2015 | Updated: June 2, 2017
Now reading version 17.1. For the latest, read: ExtendSelectionColumnToBottomOfWindow for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to extend a column selection to the bottom of the current document window, from the current cursor position.

Access

Access to this command is made using the Alt+Shift+Ctrl+PgDn keyboard shortcut only.

Use

Simply select the base character(s) of text at the required position in the document and launch the command. The selection will be extended, in a column whose width is defined by the original character selection, to the bottom of the visible document window.

Tips

  1. You can control column selection specifically by using Alt+Click-and-Drag.
  2. Column selection is disabled if word wrapping is enabled.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: