Altium Designer Documentation

ExtendSelectionToBottomOfWindow

Using Altium Documentation
Created: July 27, 2015 | Updated: April 11, 2017
Now reading version 17.1. For the latest, read: ExtendSelectionToBottomOfWindow for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:

Extend Selection to Bottom of Window


Applied Parameters: None

Summary

This command is used to extend a selection to the bottom of the current document window, from the current cursor position.

Access

Access to this command is made using the Shift+Ctrl+PgDn keyboard shortcut only.

Use

Simply position the cursor at the required position and launch the command. The selection will extend to (but not include) the character in the same column, at the bottom of the document window.

Tips

  1. You can control selection specifically by using Click-and-drag.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: