Altium Designer Documentation

ExtendSelectionToSameColumnOnNextLine

Created: July 27, 2015 | Updated: April 11, 2017
Now reading version 17.1. For the latest, read: ExtendSelectionToSameColumnOnNextLine for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to extend a selection by one line down from the current cursor position.

Access

Access to this command is made using the Shift+Down Arrow keyboard shortcut only.

Use

Simply position the cursor at the required position and launch the command. The selection will extend to (but not include) the character in the same column, one line down from the original cursor position.

Repeatedly use this command to extend the selection downward by further lines.

Tips

  1. You can control selection specifically by using Click-and-drag.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: