Altium Designer Documentation

MoveCursorRightOneWord

Using Altium Documentation
Created: July 27, 2015 | Updated: April 11, 2017
Now reading version 20.2. For the latest, read: MoveCursorRightOneWord for version 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: TextEdit Commands

The following pre-packaged resource, derived from this base command, is available:

Move Cursor Right One Word


Applied Parameters: None

Summary

This command enables you to use the keyboard to move the text cursor to the right in the current document, one word at a time.

Access

Access to this command is made using the Ctrl+Right Arrow keyboard shortcut only.

Use

Launch the command to move the text cursor to the right by one word. Use the command repeatedly to jump the text cursor to the beginning of each subsequent word.

Tips

  1. This command is not constrained to the current line. Repeated use of this command will ultimately move the text cursor all the way down to the end of the document.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: