Equalize Nets

Now reading version 1.1. For the latest, read: Equalize Nets for version 5
Applies to NEXUS Client versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Equalize Nets dialog
The Equalize Nets dialog

Summary

The Equalize Nets dialog is used to match the length of nets identified by the Matched Lengths design rule. Before launching the dialog, ensure you have set up a Matched Lengths design rule covering the nets whose length you wish to equalize.

Access

The dialog is accessed from the PCB editor by clicking Tools » Equalize Net Lengths from the main menus. See the Equalize Net Lengths command for more information.

Options/Controls

  • Style - specify the corner style for the tracks. Options include 90 Degrees, 45 Degrees, and Rounded.
  • Gap - specify the gap between two adjacent tracks.
  • Amplitude - specify the tuning amplitude when equalizing nets.