Altium NEXUS Documentation

Choose Document to Reference

Created: July 12, 2017 | Updated: February 24, 2018

The Choose Document to Reference dialog


This dialog allows you to choose the target schematic document that is to be referenced by the sheet symbol whose properties are currently being defined.


The dialog is accessed from the Properties panel in Sheet Symbol mode by clicking ... to the right of the File Name field in the Source region.


The main area of the dialog lists all candidate schematic documents for the project that can be used as the target reference sub-sheet for the sheet symbol. Each valid document's name and path to the folder in which it resides is listed.

Click on an entry to select the required document.

The sheet on which the sheet symbol is placed will not be listed. This is because a sheet symbol cannot reference the same sheet on which it is already placed.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: