Search In: Doc:Documentation: NEXUS Client
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 2.1
543.23.13.02.12.01.1
Close
Search Search on Documentation

Rotation Angle (Degrees) (Draftsman)

Created: October 12, 2018 | Updated: October 12, 2018 | Applies to versions: 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
Now reading version 2.1. For the latest, read: Rotation Angle (Degrees) (Draftsman) for version 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 The Rotate Angle (Degrees) (Draftsman) dialogThe Rotate Angle (Degrees) (Draftsman) dialog

Summary

This dialog allows you to specify an angle of rotation to be applied to selected objects in the workspace of a Draftsman document.

Access

The Rotation Angle (Degrees) dialog can be accessed from the Draftsman editor by choosing Rotate Selection in the Move pop-up menu after clicking the M shortcut key when one or more objects to be rotated are selected. 

Options/Controls

  • Angle - enter a value for rotation (resolution 0.001 degrees). Enter a positive value for counterclockwise rotation or a negative value for clockwise rotation.
Rotation is made on a subsequently chosen reference point in the workspace after clicking OK in the dialog.