Mismatched Bus Widths

Now reading version 3.0. For the latest, read: Mismatched Bus Widths for version 4

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent category: Violations Associated with Buses

Default report mode: 

Summary

This violation occurs when two net identifiers associated with the same bus slice define bus labels with differing widths. For example, a port, with name A[0..7], might be connected to a bus whose attached net label is defined as A[0..15].

Notification

If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog), an offending object will display a colored squiggle beneath it. Hovering over the object will display a pop-up hint that summarizes the violation. A notification is also displayed in the Messages panel in the following format:

Mismatched bus widths on bus section <NetName> (<BusSize1> and <BusSize2>)

where:

  • NetName is the name of the parent net to which the mismatched bus objects are associated.
  • BusSize1 is the width of the first of the offending bus objects.
  • BusSize2 is the width of the second of the offending bus objects.

Recommendation for Resolution

With the violation selected in the Messages panel, use the Details region of the panel to quickly trace the affected bus slice and identify the net identifiers (port, net label, sheet entry etc.,), the bus label widths of which are not consistent. Determine the correct width and amend the naming for the erroneous object.

Tip

  • Object hints will only appear provided the Enable Connectivity Insight option is enabled on the System - Design Insight page of the Preferences dialog. Use the controls associated with the Object Hints entry in the Connectivity Insight Options region of the page to determine the launch style for such hints (Mouse Hover and/or Alt+Double Click). 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content