Altium NEXUS Documentation

EditInternalPlanes

Created: 10.04.2018 | Updated: 10.04.2018

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: RebuildPlane=Current

Summary

After moving or placing objects in the PCB workspace, the shape of a split plane may be altered, which is not automatically updated in the display. This command is used to rebuild all split planes on the active internal plane layer.

Access

This command is accessed from the PCB Editor by choosing the Tools » Split Planes » Rebuild Split Planes on Current Layer command from the main menus.

Use

First, ensure that the internal plane layer, whose defined split planes you wish to rebuild, is the active layer in the design workspace.

After launching the command, all split plane definitions on the current internal plane layer will be re-calculated and the display updated.


Applied Parameters: RebuildPlane=All

Summary

After moving or placing objects in the PCB workspace, the shape of a split plane may be altered, which is not automatically updated in the display. This command is used to rebuild all split planes on all internal plane layers defined for the active document.

Access

This command is accessed from the PCB Editor by choosing the Tools » Split Planes » Rebuild Split Planes on All Layers command from the main menus.

Use

After launching the command, all split plane definitions, on all internal plane layers will be re-calculated and the display updated.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: