Altium NEXUS Documentation

ManageLayerSets

Created: 28.07.2017 | Updated: 02.08.2021

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: SetIndex=n (where n is in the range 0 to 20)

Summary

This command is used to switch to the indicated layer set.

Access

The related indexed commands are available from the PCB Editor from the Design » Manage Layer Sets sub-menu.

In addition, from both PCB and PCB Library Editors, the indexed commands are available from the context menu associated with the Layer Set control - accessed by clicking the LS part of the button to the left of the layer tabs at the bottom of the main design window.

Use

After launching the command, the indicated layer set is made the current layer set with only its member layers presented visibly in the design space.

Tip

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: