MoveCursor

Последнее изменение: Susan Riege; 12.07.2018

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Position = Up

Summary

This feature enables you to use the keyboard to move the cursor upwards in the current document workspace, in increments of one snap grid unit.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the cursor within the main design window, use the Up Arrow keyboard shortcut.

Use

After launching the command, cursor movement depends on the type of grid beneath the cursor:

  • Cartesian Grid - the cursor will be moved upward in the workspace by one snap grid unit.
  • Polar Grid - the cursor will be moved counterclockwise by one snap grid unit.

Use the command repeatedly to move the cursor further upward/counterclockwise.

Tips

  1. One snap grid unit is defined as being the value specified in the Step Y field (for a prevailing Cartesian grid), or the Angular Step field (for a prevailing Polar grid).


Applied Parameters: Position = Down

Summary

This feature enables you to use the keyboard to move the cursor downwards in the current document workspace in increments of one snap grid unit.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the cursor within the main design window, use the Down Arrow keyboard shortcut.

Use

After launching the command, cursor movement depends on the type of grid beneath the cursor:

  • Cartesian Grid - the cursor will be moved downward in the workspace by one snap grid unit.
  • Polar Grid - the cursor will be moved clockwise by one snap grid unit.

Use the command repeatedly to move the cursor further downward/clockwise.

Tips

  1. One snap grid unit is defined as being the value specified in the Step Y field (for a prevailing Cartesian grid), or the Angular Step field (for a prevailing Polar grid).


Applied Parameters: Position = Left

Summary

This feature enables you to use the keyboard to move the cursor to the left in the current document workspace in increments of one snap grid unit.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the cursor within the main design window, use the Left Arrow keyboard shortcut.

Use

After launching the command, cursor movement depends on the type of grid beneath the cursor:

  • Cartesian Grid - the cursor will be moved to the left in the workspace by one snap grid unit.
  • Polar Grid - the cursor will be moved inward by one snap grid unit.

Use the command repeatedly to move the cursor further left/inward.

Tips

  1. One snap grid unit is defined as being the value specified in the Step X field (for a prevailing Cartesian grid), or the Radial Step field (for a prevailing Polar grid).


Applied Parameters: Position = Right

Summary

This feature enables you to use the keyboard to move the cursor to the right in the current document workspace in increments of one snap grid unit.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the cursor within the main design window, use the Right Arrow keyboard shortcut.

Use

After launching the command, cursor movement depends on the type of grid beneath the cursor:

  • Cartesian Grid - the cursor will be moved to the right in the workspace by one snap grid unit.
  • Polar Grid - the cursor will be moved outward by one snap grid unit.

Use the command repeatedly to move the cursor further right/outward.

Tips

  1. One snap grid unit is defined as being the value specified in the Step X field (for a prevailing Cartesian grid), or the Radial Step field (for a prevailing Polar grid).


Applied Parameters: Position = Up10

Summary

This feature enables you to use the keyboard to move the cursor upwards in the current document workspace in increments of ten snap grid units.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the cursor within the main design window, use the Shift+Up Arrow keyboard shortcut.

Use

After launching the command, cursor movement depends on the type of grid beneath the cursor:

  • Cartesian Grid - the cursor will be moved upward in the workspace by ten snap grid units.
  • Polar Grid - the cursor will be moved counterclockwise by ten snap grid units.

Use the command repeatedly to move the cursor further upward/counterclockwise .

Tips

  1. One snap grid unit is defined as being the value specified in the Step Y field (for a prevailing Cartesian grid), or the Angular Step field (for a prevailing Polar grid).


Applied Parameters: Position = Down10

Summary

This feature enables you to use the keyboard to move the cursor downwards in the current document workspace in increments of ten snap grid units.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the cursor within the main design window, use the Shift+Down Arrow keyboard shortcut.

Use

After launching the command, cursor movement depends on the type of grid beneath the cursor:

  • Cartesian Grid - the cursor will be moved downward in the workspace by ten snap grid units.
  • Polar Grid - the cursor will be moved clockwise by ten snap grid units.

Use the command repeatedly to move the cursor further downward/clockwise.

Tips

  1. One snap grid unit is defined as being the value specified in the Step Y field (for a prevailing Cartesian grid), or the Angular Step field (for a prevailing Polar grid).


Applied Parameters: Position = Left10

Summary

This feature enables you to use the keyboard to move the cursor to the left in the current document workspace in increments of ten snap grid units.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the cursor within the main design window, use the Shift+Left Arrow keyboard shortcut.

Use

After launching the command, cursor movement depends on the type of grid beneath the cursor:

  • Cartesian Grid - the cursor will be moved to the left in the workspace by ten snap grid units.
  • Polar Grid - the cursor will be moved inward by 10 snap grid units.

Use the command repeatedly to move the cursor further left/inward.

Tips

  1. One snap grid unit is defined as being the value specified in the Step X field (for a prevailing Cartesian grid), or the Radial Step field (for a prevailing Polar grid).


Applied Parameters: Position = Right10

Summary

This feature enables you to use the keyboard to move the cursor to the right in the current document workspace in increments of 10 snap grid units.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the cursor within the main design window, use the Shift+Right Arrow keyboard shortcut.

Use

After launching the command, cursor movement depends on the type of grid beneath the cursor:

  • Cartesian Grid - the cursor will be moved to the right in the workspace by 10 snap grid units.
  • Polar Grid - the cursor will be moved outward by 10 snap grid units.

Use the command repeatedly to move the cursor further right/outward.

Tips

  1. One snap grid unit is defined as being the value specified in the Step X field (for a prevailing Cartesian grid), or the Radial Step field (for a prevailing Polar grid).


Applied Parameters: Position = Up|MoveSelection=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) upwards in the current document workspace in increments of one snap grid unit.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the required objects selected, use the Ctrl+Up Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved upward in the workspace by one snap grid unit.

Use the command repeatedly to move the selection further upward.

Tips

  1. One snap grid unit is defined as being the value specified in the Step Y field (for the default Global Board Snap Grid).
  2. Note that the feature adheres to the default snap grid for the board only, ignoring any custom local grids (Cartesian and Polar).


Applied Parameters: Position = Down|MoveSelection=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) downwards in the current document workspace in increments of one snap grid unit.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the required objects selected, use the Ctrl+Down Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved downward in the workspace by one snap grid unit.

Use the command repeatedly to move the selection further downward.

Tips

  1. One snap grid unit is defined as being the value specified in the Step Y field (for the default Global Board Snap Grid).
  2. Note that the feature adheres to the default snap grid for the board only, ignoring any custom local grids (Cartesian and Polar).


Applied Parameters: Position = Left|MoveSelection=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) to the left in the current document workspace in increments of one snap grid unit.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the required objects selected, use the Ctrl+Left Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved to the left in the workspace by one snap grid unit.

Use the command repeatedly to move the selection further to the left.

Tips

  1. One snap grid unit is defined as being the value specified in the Step X field (for the default Global Board Snap Grid).
  2. Note that the feature adheres to the default snap grid for the board only, ignoring any custom local grids (Cartesian and Polar).


Applied Parameters: Position = Right|MoveSelection=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) to the right in the current document workspace in increments of one snap grid unit.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the required objects selected, use the Ctrl+Right Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved to the right in the workspace by one snap grid unit.

Use the command repeatedly to move the selection further to the right.

Tips

  1. One snap grid unit is defined as being the value specified in the Step X field (for the default Global Board Snap Grid).
  2. Note that the feature adheres to the default snap grid for the board only, ignoring any custom local grids (Cartesian and Polar).


Applied Parameters: Position = Up10|MoveSelection=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) upwards in the current document workspace in increments of ten snap grid units.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the required objects selected, use the Shift+Ctrl+Up Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved upward in the workspace by ten snap grid units.

Use the command repeatedly to move the selection further upward.

Tips

  1. One snap grid unit is defined as being the value specified in the Step Y field (for the default Global Board Snap Grid).
  2. Note that the feature adheres to the default snap grid for the board only, ignoring any custom local grids (Cartesian and Polar).


Applied Parameters: Position = Down10|MoveSelection=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) downwards in the current document workspace in increments of ten snap grid units.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the required objects selected, use the Shift+Ctrl+Down Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved downward in the workspace by ten snap grid units.

Use the command repeatedly to move the selection further downward.

Tips

  1. One snap grid unit is defined as being the value specified in the Step Y field (for the default Global Board Snap Grid).
  2. Note that the feature adheres to the default snap grid for the board only, ignoring any custom local grids (Cartesian and Polar).


Applied Parameters: Position = Left10|MoveSelection=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) to the left in the current document workspace in increments of ten snap grid units.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the required objects selected, use the Shift+Ctrl+Left Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved to the left in the workspace by ten snap grid units.

Use the command repeatedly to move the selection further to the left.

Tips

  1. One snap grid unit is defined as being the value specified in the Step X field (for the default Global Board Snap Grid).
  2. Note that the feature adheres to the default snap grid for the board only, ignoring any custom local grids (Cartesian and Polar).


Applied Parameters: Position = Right10|MoveSelection=True

Summary

This feature enables you to use the keyboard to move the current selection (one or more selected design objects) to the right in the current document workspace in increments of ten snap grid units.

Access

This command is accessed from the PCB Editor and PCB Library Editor. With the required objects selected, smply use the Shift+Ctrl+Right Arrow keyboard shortcut.

Use

After launching the command, the selection will be moved to the right in the workspace by ten snap grid units.

Use the command repeatedly to move the selection further to the right.

Tips

  1. One snap grid unit is defined as being the value specified in the Step X field (for the default Global Board Snap Grid).
  2. Note that the feature adheres to the default snap grid for the board only, ignoring any custom local grids (Cartesian and Polar).

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе:
Бесплатная пробная версия Altium Designer
Бесплатная пробная версия Altium Designer
Давайте приступим. Для начала, Вы или Ваше предприятие уже используете Altium Designer?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

В таком случае, для чего Вам необходима пробная лицензия?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вам для этого не нужна пробная лицензия.

Нажмите кнопку ниже, чтобы загрузить установщик самой новой версии Altium Designer

Загрузить установщик Altium Designer

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Пожалуйста, заполните форму ниже, чтобы получить ценовое предложение.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Если Ваша подписка Altium активна, у Вас нет необходимости в пробной лицензии.

Если у Вас нет активной подписки Altium, пожалуйста, заполните форму ниже, чтобы получить пробную версию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Для чего Вы хотите попробовать Altium Designer?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вы нашли нужное место! Пожалуйста, заполните форму ниже, чтобы начать использование пробной версии.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Вы можете загрузить бесплатную лицензию средства просмотра Altium Designer Viewer сроком действия 6 месяцев.

Пожалуйста, заполните форму ниже, чтобы запросить эту лицензию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Замечательно! Создавать новое - отличное занятие. У нас есть превосходная программа для Вас.

Upverter - бесплатная платформа, разработанная специально для любителей проектирования.

Нажмите здесь, чтобы попробовать!

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вы можете загрузить бесплатную лицензию средства просмотра Altium Designer Viewer сроком действия 6 месяцев.

Пожалуйста, заполните форму ниже, чтобы запросить эту лицензию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.