Altium NEXUS Documentation


Created: 27.07.2015 | Updated: 11.04.2017
Вы просматриваете версию 3.2. Для самой новой информации, перейдите на страницу для версии 5

Parent page: Schematic Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to change the selection status of a single design object, on the current document, without affecting the status of other objects.


This command can be accessed from the Schematic Editor and the Schematic Library Editor, by using the Shift+click keyboard shortcut.


Simply position the cursor over the object whose selection status is to be changed, and launch the command. If the object was not previously selected, it will become so. If the object was already selected, it will be de-selected.


  1. If the Click Clears Selection option is disabled, on the Schematic - Graphical Editing page of the Preferences dialog, then the selection status of an individual object in the document can be toggled, simply by positioning the cursor over it and clicking.


Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: