Altium NEXUS Documentation


Created: 21.06.2017 | Updated: 21.06.2017
Вы просматриваете версию 3.2. Для самой новой информации, перейдите на страницу для версии 5

Parent page: Schematic Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to turn the visible grid on or off in the current document.


This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the View » Grids » Toggle Visible Grid command, from the main menus.
  • Choosing the Toggle Visible Grid command, on the Grids drop-down () of the Utilities toolbar.
  • Using the Shift+Ctrl+G keyboard shortcut.


The visible grid is used purely as an aid for visually aligning objects. The setting of this grid has no affect on the cursor movement during editing.

Launch the command to toggle the visible grid status on or off.


  1. The visible grid can also be enabled/disabled using the Show Grid option, in the General section of the Properties panel (when no objects are currently selected in the workspace).

  2. Metric and Imperial presets for the visible grid can be defined from the Schematic - Grids page of the Preferences dialog.


Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: