Configuring PCB OLE Object Properties in Altium Designer
Created: сентября 15, 2017 | Updated: марта 14, 2018
| Applies to versions: 18.0 and 18.1
Вы просматриваете версию 18.0. Для самой новой информации, перейдите на страницу Configuring PCB OLE Object Properties in Altium Designer для версии 21
Parent page: OLE Object
PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined using the following:
- Post-placement settings – all OLE Object object properties are available for editing in the Properties panel when a placed OLE Object is selected in the workspace.
Location
- (X/Y) - the current X (horizontal) coordinate and current Y (vertical) coordinate of the reference point of the object relative to the current workspace origin. Edit to change the position of the object.
- Rotation - the object's angle of rotation (in degrees), measured counterclockwise from zero (the 3 o'clock horizontal). Edit to change the rotation of the object. Minimum angular resolution is 0.001°.
Properties
- Layer - the layer to which the object is currently assigned. Use the drop-down to select a different layer.
- Edit Data - click to open the object (in the associated application) to make any required edits. After making edits, click Save to save the edits or Cancel.