Документация Altium Designer
...
((Schematic Query Functions))_AD
SCH Query((Fields))_AD
Query_Lang-SCHFunctions_Fields_PinIeeeSymbolOuterEdgePinIeeeSymbolOuterEdge_AD
Created: сентября 16, 2015 | Updated: августа 18, 2021
| Applies to versions: 15.1, 16.0, 16.1, 17.0, 17.1, 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Вы просматриваете версию 17.0. Для самой новой информации, перейдите на страницу Query_Lang-SCHFunctions_Fields_PinIeeeSymbolOuterEdge((PinIeeeSymbolOuterEdge))_AD для версии 21
Parent page: Schematic Query Functions - Fields
Summary
Returns all pin objects whose IEEE Symbol Outside Edge property complies with the Query.
Syntax
PinIeeeSymbolOuterEdge = IeeeSymbolOuterEdge_String
PinIeeeSymbolOuterEdge <> IeeeSymbolOuterEdge_String
IeeeSymbolOuterEdge_String must be one of the following strings:
- 'Active Low Input'
- 'Active Low Output'
- 'Dot'
- 'No Symbol'
Example Usage
PinIeeeSymbolOuterEdge = 'Dot'
Returns all pin objects whose IEEE Symbol Outside Edge property is Dot.
PinIeeeSymbolOuterEdge <> 'Active Low Output'
Returns all objects except pin objects whose IEEE Symbol Outside Edge property is Active Low Output.
IsPin && PinIeeeSymbolOuterEdge <> 'No Symbol'
Returns all pin objects except those whose IEEE Symbol Outside Edge property is No Symbol.
Tips
- The single quote characters (') at the start and end of
IeeeSymbolOuterEdge_Stringare mandatory. - The IEEE Symbol Outside Edge property is only defined for pin objects.