Altium Designer Documentation

Selection Memory (SCH)

Created: July 28, 2015 | Updated: June 19, 2017
Now reading version 16.1. For the latest, read: Selection Memory (SCH) for version 22

The Selection Memory dialog.
The Selection Memory dialog.


The Selection Memory dialog allows the designer to store selected objects to memory and then recall these selections from memory.


This dialog can be accessed in the following ways:

  • Click the  button at the bottom right of the Sch Editor or Sch Library Editor.
  • In the Sch editor, press shortcut keys Ctr+Q to open the dialog. Note that the shortcut keys won't work if another dialog is currently open.


  • STO - Click a STO  (#) button to store the current selection in that memory slot.
  • Clear - Click this button to clear the related memory slot.
  • Apply - Click this button to highlight the related memory contents.
  • RCL - Click this button to select  the related memory contents.
  • Memory Slot Status - There are 8 memory slots. This field will show the current status for these memory slots (E.g., Empty, 1 Component, 10 Tracks, etc.).
  • Lock - Check this box to lock the selected objects into selection memory.
  • Mask - When enabled, all objects not falling under the scope of the filter will be masked.
  • Select - When enabled, the filtered objects will be selected in the workspace.
  • Zoom - When enabled, the filtered objects will be zoomed and centered (where possible) in the library editor window. The zoom action can be determined by the Zoom Library Components options set in the Schematic - Library AutoZoom page of the Preferences dialog.
  • Clear Existing - When enabled, previous selections will be cleared.
  • Clear Button - Click to clear the selection status of any selected objects in document.
  • Document Scope - Choose a document scope for the selection. Options are either Current Document or Open Documents.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: