Altium Designer Documentation


Created: April 17, 2018 | Updated: April 17, 2018

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to change the view in the main design window so that the active Multi-board Schematic document (*.MbsDoc) is entirely visible in the workspace.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.


With the desired document selected in the Projects panel, this command is accessed from the Multi-board Schematic Editor by choosing the View » Fit Selected Sheet command from the main menus.


Ensure that the desired document that you want to fit within the displayed workspace is selected.

After launching the command, the view in the main design window will change to fit the entire sheet. The selected sheet will be zoomed (in or out) and centered in the window.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: