Altium NEXUS Documentation

InfoQueryNet

Created: June 11, 2016 | Updated: April 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to obtain information with respect to a single selected net in the current document.

Access

This command can be accessed from the CAMtastic Editor by:

  • Choosing the Analysis » Query » Net command from the main menus.
  • Using the Shift+N keyboard shortcut.

Use

First, ensure that the CAMtastic panel is visible.

After launching the command, the cursor will change to a pointing hand and you will enter net query mode. Simply position the cursor over an object that resides in the required net, and click . The entire net will become selected and information relating to that net will appear on the Info tab of the CAMtastic panel. The information includes the name of the net, the layer and type upon which it resides, and its total length.

Continue interrogating further nets, or press Esc to exit query mode.

Tips

  1. All measurement information uses the current units for the workspace - either inches or millimeters. Units can be changed either from the CAMtastic panel, or the CAM Editor - Drawing Modes page of the Preferences dialog.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: