Altium NEXUS Documentation

EditArray

Modified by Jason Howie on Apr 11, 2017

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to copy selected objects and place them in a defined array within the current document.

Access

This command can be accessed from the CAMtastic Editor by:

  • Choosing the Edit » Objects » Array command from the main menus.
  • Clicking the  button, on the Editing Tools drop-down () of the Utilities toolbar.
  • Using the Ctrl+A keyboard shortcut.

Use

After launching the command, the cursor will change to a square and you will enter array placement mode. An array is placed by performing the following sequence of actions:

  1. Click on the objects that are to be included in the array, making them selected. Clicking away from an object allows you to drag a selection area, for including multiple objects in the selection. Selection is cumulative.
  2. When all required objects have been selected, right-click. The Edit Array dialog appears. The dialog allows you to define the number of rows and columns in the array and also to precisely define the spacing for the array, using one of two methods:
    • Distance - this method allows you to specify the spacing between rows and columns, in relation to the size of the image (i.e. the selection of objects). When you specify a value in a Distance field, you need to add the required spacing to the value in the Image Size field and enter this combined value as the distance. For example, if the image size is 0.5inches and you require a 200mil spacing, you would need to enter 0.7 in the corresponding Distance field.
    • Gap - this method allows you to specify the direct spacing between rows and columns and therefore not dependent on the image size. For example, if you require a 200mil spacing, you would need to enter 0.2 in the corresponding Gap field.
Click the Show Preview button to expand the dialog to display the array preview window, where you can view how the array will look when placed. The preview will update as you make changes to the array settings.
  1. After defining the array as required, click OK to effect its placement. The array starts with the original selected objects and is placed upwards and to the left.
  2. Continue selecting further objects to include in further arrays, or right-click, or press Esc, to exit.

Tips

  1. Step & Repeat codes can be used with arrays. They basically enable the use of looped code instead of rewriting identical sequences, therefore reducing the size of generated files.
  2. Images in the array can overlap by entering a negative value for the corresponding Gap, or a value for the Distance that is less than the corresponding image size.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.