Altium NEXUS Documentation

Sch_Cmd-IncrementComponentPartNumberIncrementComponentPartNumber_AD

Using Altium Documentation
Created: July 27, 2015 | Updated: August 1, 2018
Now reading version 3.2. For the latest, read: IncrementComponentPartNumber for version 5
Applies to altium-nexus versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:

Increment Part Number


Applied Parameters: None

Summary

This command is used to visually cycle forward through the available part numbers for a placed multi-part component.

Access

This command is accessed from the Schematic Editor by choosing the Edit » Increment Part Number command from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to choose a part. Position the cursor over the multi-part component whose part you wish to increment then click or press Enter. The symbol graphic (and designator) will change accordingly to display the next sequential part for that component.

Continue cycling through part numbers for the same or other multi-part components, or right-click or press Esc to exit part increment mode.

Increment Part Number (Context Sensitive)


Applied Parameters: ContextSensitive=True

Summary

This command is used to visually cycle to the next available part number for the multi-part component currently under the cursor.

Access

This feature is accessed from the Schematic Editor by right-clicking over a placed multi-part component then choosing the Part Actions » Increment Part Number command from the context menu.

Use

First, ensure that the cursor is placed over the multi-part component whose part you wish to increment.

After launching the command, the symbol graphic (and designator) will change accordingly to display the next sequential part for that component.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: