Confirm Save for Modified Documents

Now reading version 3.0. For the latest, read: Confirm Save for Modified Documents for version 5
Applies to NEXUS Client versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 The Confirm Save for Modified Documents dialog The Confirm Save for Modified Documents dialog

Summary

The Confirm Save for Modified Documents dialog allows you to choose which modified documents are to be saved and which are not when closing one or more projects that have design documents with unsaved modifications.

Access

This dialog is accessed in the following ways:

  • When attempting to close an open project that has at least two modified design documents that have not yet been saved.
  • When attempting to close Altium NEXUS when there are at least two open, modified design documents across multiple projects that have not yet been saved.

Options/Controls

  • Document List - the main area of the dialog lists all open and modified documents for which you need to make a decision about whether or not to save. Documents are grouped by type (e.g., PCB Documents, PCB Projects, Schematic Documents). Each document lists the following:
    • Document Name - the name of the document.
    • Document Path - the path to the local copy of the document that resides in the applicable installation folder.
    • Decision - the decision of whether or not to save the document. By default, the entry will be set to   Save. Use the drop-down to change this to   Don't Save if desired.
  • Save All - click to quickly set the decision for all documents in the list to   Save.
  • Save None - click to quickly set the decision for all documents in the list to   Don't Save.
  • Save Selected - click to quickly set the decision for all currently selected documents in the list to   Save.
Use standard Ctrl+click and Shift+click techniques to select multiple entries. Note that multi-selection only works across documents in the same grouped category