Altium NEXUS Documentation

WorkspaceManager_Err-FloatingDirectiveObjectFloating Directive Object_AD

Created: December 11, 2020 | Updated: August 4, 2021
All Contents

Parent category: Violations Associated with Others

Default report mode: 

Summary

This violation occurs when there is a floating Parameter Set directive, NoERC directive, Differential Pair directive, or Probe object.

Notification

If a design project is being finalized and contains a floating Parametric Set directive, NoERC directive, Diff Pair directive, or Probe object, this is indicated during project Validation by demonstrating the warning in the Messages panel

A notification is displayed in the Messages panel in the following format:

Floating <Parameter Set directive, NoERC directive, Differential Pair directive, or Probe object> at <coordinates>,

where:

  • Parameter Set directive, NoERC directive, Differential Pair directive, or Probe object is the floating object located on the design space. 
  • Coordinate is the location at which the floating parameter is located on the design space. 

Recommendation for Resolution

Attach the floating Parameter Set directive, NoERC directive, Differential Pair directive, or Probe object to their intended location. 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: