Altium NEXUS Documentation

SelectNext

Modified by Tiffany Cullen on Nov 22, 2018
このページは、サポート対象外となったAltium Vaultについて紹介しています。Altium Vaultとそのコンポーネント管理機能は Altium Concord Proに移行しました。

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: None

Summary

This command is used to single select the next design object in a set of co-located (overlapping) objects without utilizing a selection pop-up window.

Access

This command is accessed from the PCB Editor and the PCB Library Editor by:

  • Choosing the Edit » Select » Select Overlapped command from the main menus.
  • Using the Shift+Tab keyboard shortcut.
  • Clicking in the same position.

Use

To use this command, ensure that the Display popup selection dialog option is disabled on the PCB Editor - General page of the Preferences dialog.

Select an object that is co-located in a 'stack' of overlapping objects. After launching the command, selection will cycle to the next object in that stack. Selection obeys the following fixed order priority, cycled through successive use of the command:

  1. Pad
  2. Via
  3. Track/Arc
  4. Component
  5. Polygon
  6. Region/Fill
  7. Text

Additionally, while using the Shift key to add additional objects to a current selection, you can use Shift+Tab to cycle through selection of the overlapping objects without losing your original selection.

Selection order also takes into account the current layer first before progressing to those objects on other layers.

Tips

  1. To use a graphical pop-up selection window to select an object in an area of co-located objects, ensure the Display popup selection dialog option is enabled on the PCB Editor - General page of the Preferences dialog.
  2. Double-clicking on an area of co-located objects will always provide access to the pop-up selection window.
  3. Using the Properties or Find Similar Objects commands on the right-click context menu will open the Properties panel (presenting object properties) or the Find Similar Objects dialog, respectively, for the currently selected object under the cursor.


Applied Parameters: None

Summary

This command is used to single select the next design object in a set of co-located (overlapping) objects without utilizing a selection pop-up window.

Access

This command is accessed from the PCB Editor and the PCB Library Editor by:

  • Locating and using the Select overlapped command on the Active Bar.
  • Using the Shift+Tab keyboard shortcut.
Click and hold on the active button to access a menu of all associated commands for that grouping. If the command has been recently used from the Active Bar, it will become the active/visible button. When other commands are available it is indicated by a triangle at the bottom-right corner of the button.

Use

To use this command, ensure that the Display popup selection dialog option is disabled on the PCB Editor - General page of the Preferences dialog.

First, select an object that is co-located in a 'stack' of overlapping objects. After launching the command, selection will cycle to the next object in that stack. Selection obeys the following fixed order priority, cycled through successive use of the command:

  1. Pad
  2. Via
  3. Track/Arc
  4. Component
  5. Polygon
  6. Region/Fill
  7. Text

Additionally, while using the Shift key to add additional objects to a current selection, you can use Shift+Tab to cycle through selection of the overlapping objects without losing your original selection.

Selection order also takes into account the current layer first before progressing to those objects on other layers.

Tips

  1. To use a graphical pop-up selection window to select an object in an area of co-located objects, ensure the Display popup selection dialog option is enabled on the PCB Editor - General page of the Preferences dialog.
  2. Double-clicking on an area of co-located objects will always provide access to the pop-up selection window.
  3. Using the Properties or Find Similar Objects commands on the right-click context menu will open the Properties panel (presenting object properties), or the Find Similar Objects dialog, respectively, for the currently selected object under the cursor.


Applied Parameters: SelectTopologyObjects = TRUE

Summary

With an initial object selected in the design, this command is used to extend the selection to include the next higher-level object (or objects) based on logical hierarchy.

Access

This command can be accessed from the PCB Editor and the PCB Library Editor by:

  • Choosing the Edit » Select » Select Next command from the main menus.
  • Using the Tab keyboard shortcut.
Quickly access the command using the S, X keyboard sequence.

Use

Select your initial design object within the design workspace. After launching the command, the next higher-level object will also be selected thus extending the selection based on the logical hierarchy.

The following cyclic logical selection 'flows' are supported:

  • Track Segment ---> All Connected (Contiguous) Track on the Same Layer ---> All Connected Copper ---> All Electrical Objects in the Associated Net
  • Connected Pad ---> All Connected (Contiguous) Track on the Same Layer ---> All Connected Copper ---> All Electrical Objects in the Associated Net
  • Unconnected Pad ---> All Electrical Objects in the Associated Net
  • Via ---> All Connected (Contiguous) Track on Layers Associated with Via ---> All Connected Copper ---> All Electrical Objects in the Associated Net
  • Copper (Region/Polygon Pour/Fill) ---> All Connected Copper ---> All Electrical Objects in the Associated Net
  • Free Pad/Via ---> All Connected (Contiguous) Track on the Same Layer as Pad, or on Layers Associated with Via---> All Connected Copper ---> All Electrical Objects in the Associated Net.
  • Component ---> Via Fanouts, Escapes, Interconnect
Via Fanouts:
If a short enough trace connects a pad to a via and there is no other pad connected to this via by a shorter trace, then this trace and the via are considered this pad's Fanout.

Escapes:
A short enough antenna connected to a pad is considered this pad's Escape.

Interconnect:
A trace connecting two objects already picked up (for example, pads or fanout vias) is conisdered Interconnect.

In addition, the feature caters for selection extension across multiple objects, selected across different nets in the design.

Example selection across multiple nets, extending from the initially selected track segments, up the higher-order logical hierarchy.


Applied Parameters: SelectTopologyObjects = TRUE

Summary

With an initial object selected in the design, this command is used to extend the selection to include the next higher-level object (or objects) based on logical hierarchy.

Access

This command can be accessed from the PCB Editor and the PCB Library Editor by:

  • Locating and using the Select next command on the Active Bar.
  • Using the Tab keyboard shortcut.
Click and hold on the active button to access a menu of all associated commands for that grouping. If the command has been recently used from the Active Bar, it will become the active/visible button. When other commands are available it is indicated by a triangle at the bottom-right corner of the button.
Quickly access the command using the S, X keyboard sequence.

Use

Select your initial design object within the design workspace. After launching the command, the next higher-level object will also be selected thus extending the selection based on the logical hierarchy.

The following cyclic logical selection 'flows' are supported:

  • Track Segment ---> All Connected (Contiguous) Track on the Same Layer ---> All Connected Copper ---> All Electrical Objects in the Associated Net
  • Connected Pad ---> All Connected (Contiguous) Track on the Same Layer ---> All Connected Copper ---> All Electrical Objects in the Associated Net
  • Unconnected Pad ---> All Electrical Objects in the Associated Net
  • Via ---> All Connected (Contiguous) Track on Layers Associated with Via ---> All Connected Copper ---> All Electrical Objects in the Associated Net
  • Copper (Region/Polygon Pour/Fill) ---> All Connected Copper ---> All Electrical Objects in the Associated Net
  • Free Pad/Via ---> All Connected (Contiguous) Track on the Same Layer as Pad, or on Layers Associated with Via---> All Connected Copper ---> All Electrical Objects in the Associated Net.
  • Component ---> Via Fanouts, Escapes, Interconnect
Via Fanouts:
If a short enough trace connects a pad to a via and there is no other pad connected to this via by a shorter trace, then this trace and the via are considered this pad's Fanout.

Escapes:
A short enough antenna connected to a pad is considered this pad's Escape.

Interconnect:
A trace connecting two objects already picked up (for example, pads or fanout vias) is conisdered Interconnect.

In addition, the feature caters for selection extension across multiple objects, selected across different nets in the design.

Example selection across multiple nets, extending from the initially selected track segments, up the higher-order logical hierarchy.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

お問合せ

お近くの営業所にお問合せください。

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 無償評価版
Altium Designer 無償評価版
Altium Designerを使用していますか?

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

評価版ライセンスが必要な理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、評価版ライセンスは不要です。

ボタンをクリックして、最新のAltium Designerインストーラをダウンロードしてください。

Altium Designerインストーラをダウンロードする

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

Altium Designerの新規ライセンスのお見積もりをご希望の場合、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerサブスクリプションをご利用中の場合、評価版ライセンスは不要です。

お客様がAltium Designerサブスクリプションの有効なメンバーではない場合、下記のフォームに入力して無償評価版をダウンロードしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerを評価する理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

無償評価版を使用するには、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

素晴らしいですね。アルティウムではモノづくりに最適なプログラムを提供しています。

Upverterは、コミュニティ主導型の無償プラットフォームで、お客様のような作り手の要求に合わせて設計されています。

試してみる場合、こちらをクリック してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。