Altium NEXUS Documentation


Created: July 27, 2015 | Updated: July 17, 2018
現在、バージョン 2.1 をご覧頂いています。 最新情報については、バージョン 4 の をご覧ください。

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Applied Parameters: None


This command is used to switch the display of the PCB workspace to Board Planning Mode. Use this mode to define the board shape, and also to position and configure split lines and bending lines on a rigid-flex design. Split lines are used to divide the board into regions; each region can then be assigned a different layer stack.


This command can be accessed from the PCB Editor by:

  • Choosing the View » Board Planning Mode command from the main menus.
  • Using the 1 keyboard shortcut.


After launching the command, the workspace will change to display the board in Board Planning Mode. Relevant commands for features available in this mode can be found on the main Design menu.


  1. To switch to 2D Layout Mode or 3D Layout Mode, use the commands of the same name from the main View menu, or use the 2, or 3, keyboard shortcuts, respectively.


Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.



We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: