Altium NEXUS Documentation

Draftsman_Obj-BoardFabricationViewBoard Fabrication View – Вид платы для изготовления_AD

Полное содержание

Parent page: Draftsman Objects

A placed board Fabrication View set to the Top view sideA placed board Fabrication View set to the Top view side


A Draftsman Board Fabrication View is an automated graphic composite of the PCB project's unpopulated (bare) board, as viewed from the Top or Bottom. The drawing data is sourced from a specified physical board layer, and polygon copper fills canbe displayed as solid, hatched or as simple outlines. Its drawing representation and data sources are all configurable in the Properties panel.


Board Fabrication Views are available for placement in a PCB project Draftsman document from the Draftsman Editor as follows:

  • Choose the Place » Board Fabrication View command from the main menu (Place Board Fabrication View).
  • Click the button on the Active Bar, located at the top of the workspace.
  • Right-click in the drawing workspace thenselect Place » Board Fabrication View from the context menu.
  • Click the  entry on the Drawing Views toolbar (View » Toolbars » Drawing Views to enable).


After launching the command, drawing data is retrieved from the source PCB file, the cursor will change to a cross-hair and the rendered Fabrication View is attached to the cursor. Move the cursor to the desired position then click to confirm the placement.

Note that drawing data is retrieved from the PCB document specified in the Source section of the Properties panel when in Document Options mode. To change the panel to that mode, deselect all objects in the workspace (click in free space).

Graphical Editing

Both the position and size of placed Board Fabrication View can be graphically modified.

A selected Board Fabrication View will show a node handle at the top right of the selection outline, which can be dragged to a new location to modify the view's size. To move an Board Fabrication View, drag and drop it to a new location.

Drag a selected BoardFabrication View's resize node change its scale.Drag a selected BoardFabrication View's resize node change its scale.

The default settings for the Board Fabrication View are available in the Draftsman - Defaults page of the Preferences dialog.

Non-Graphical Editing

Properties page: Fabrication View Properties

The non-graphical method of editing a Board Fabrication View is available in the Draftsman Properties panel, which provides a comprehensive range of editable properties, options and design content settings for placed Draftsman views.

The Properties panel when a Board Fabrication View is selected.The Properties panel when a Board Fabrication View is selected.

To open the Properties panel and access the properties of a placed Fabrication View:

  • Double-click on the Fabrication View object in the workspace.
  • Right-click on the Fabrication View then select Item Properties from the context menu.

If the Properties panel is already active:

  • Click on the Fabrication View object to access its properties in the panel.
To manually open the Properties panel, select View » Panels » Properties from the main menus or click the button at the bottom right of the workspace then select Properties from the pop-up menu.


Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: