General tab has options to configure your printer and page settings. Print & Presets Settings
Printer – this field reflects the current printer to which the printed output will be sent. Use the drop-down to choose another printer from all those currently installed for your computer. Click the button to access the following options:
Printer Settings – use to open the Microsoft Print to PDF Document Properties dialog, where you may configure printer files based on your printer or Operating System.
Set as Default – use to set the selected printer as default.
Add Printer – use to add a printer from your Windows system.
Print to file – use to create an Out folder within your project file. You may produce (
*.ini) files regarding all pages and export all pages to (
Copies – use this field to specify the number of copies of the page (or page set) to be printed.
Print Range – use the controls in this region to specify which pages are to be printed when the prospective print job includes multiple pages. Choose one of the following options:
All Pages – enable this option to print all pages in relation to the print-based output being generated.
Pages From – enable this option to print a range of pages. Use the fields to specify the start and end pages (inclusive) in the required range. Page Settings
Color Set – use this option to choose which color set you want to use for the printed output. Available color sets are: Gray, Mono, and Color.
Page Size – select a paper size from the drop-down.
Orientation – use these options to choose between printing in Portrait or Landscape orientation. Scale & Position Settings
Scale Mode – use the drop-down to select the mode of scaling desired. Choose from
Actual Size or
Fit On Page.
Scale – this field is available when Scale Mode is set to
Actual Size. Use it to define how much the document is scaled. Entering a value greater than
1 will essentially enlarge the print (a zoomed-in effect), while entering a value less than
1 will shrink it (a zoomed-out effect).
Horizontal Offset – use to manually adjust the position of the printed content on the page in the horizontal plane. Enter a positive value to shift the printed content to the right on the page or a negative value to shift it left. If the field is set to zero, the minimum horizontal left-hand margin required by the printer is used. Enable the Center option to automatically position the printed content so that it is centered horizontally on the page.
Vertical Offset – use to manually adjust the position of the printed content on the page in the vertical plane. Enter a positive value to shift the printed content upward on the page or a negative value to shift it downward. If the field is set to zero, the minimum vertical bottom margin required by the printer is used. Enable the Center option to automatically position the printed content so that it is centered vertically on the page. Area to Print
Type – use the controls in this region to determine the area of the board to be printed. Choose from:
Entire Sheet – print the whole board.
Specific Area – only print the defined area. With this option enabled, the following controls become available:
Start Point (X/Y) – use these fields to define the X and Y coordinates for the bottom-left corner of the required print area.
End Point (X/Y) – use these fields to define the X and Y coordinates for the top-right corner of the required print area.
Select Area on PCB – use this button to interactively define the area to be printed in the PCB document design space. Pages Tab
Pages tab includes display options, options to manage layer settings, and allows you to add/remove pages.
Add Page – click the button to add a new page with default settings and no layer selected. Click the drop-down arrow associated to the button to access the available options as follows:
Create Final – use to quickly create a complete, predefined final artwork print-set for the source PCB document.
Create Composite – use to quickly create a predefined multi-layer composite print for the source PCB document.
Create Power-Plane Set – use to quickly create predefined power-plane drawings for the source PCB document.
Create Mask Set – use to quickly create predefined solder/paste mask drawings for the source PCB document.
Create Drill Drawings – use to quickly create a predefined set of drill drawings and guides for the source PCB document.
Create Assembly Drawings – use to quickly create predefined assembly drawings for the source PCB document.
Create Composite Drill Guide – use to quickly create a predefined composite drill drawing for the source PCB document.
Page list – the list of pages to be printed. Each page is represented by its tile where from the following options can be accessed:
– use the ellipsis button to access the page management options:
Edit – use this option to change the name of the page as desired, giving a more meaningful name that will readily identify its nature and purpose.
Move Page Up / Move Page Down – use these options to change the position of the page in the list, which changes the print rendering order.
Delete Page – use this option to remove the page from the list.
Printout Properties – use the control at the right to access various printout property options. Depending on the state of these options, the control will be shown as Default or Custom. The options may be enabled to control which components are included in associated printouts (such as whether or not you choose to show surface-mounts), as well as additional controls (such as mirroring layers and the size of the font used for pad numbers and net text).
Displayed Layers – use the control at the right to access the options to manage the list of layers and their display settings for the current page. The numbers in the control represent how many layers from the overall number of PCB layers are selected for the page.
Advanced tab provides designator setting options as well as font and color options. Designator Print Settings
Use the control in this region to specify the type of designator information to be included on the printouts. Choose from the drop-down to either
Print Physical Designators or Print Logical Designators. Options
Print Keepout Objects – enable this option to have keepout-designated design objects included on the printed document. Replace Stroke fonts by TT fonts
Enable Fonts Replacement – check this box to enable the ability to replace fonts.
Default – check the box to use default settings. You may use the drop-down to change the font.
Serif – check this box to use the Serif font. You may use the drop-down to change the font.
Sans Serif – check this box to use the Sans Serif font. You may use the drop-down to change the font. Colors Settings
Use Net override color – enable this option to have the net color used in prints rather than the layer color.
Retrieve Layer Colors from PCB – click this button if you want to print using the same colors configured for the PCB design in the PCB Editor.
Save as Default – click to overwrite default color set with your local color set. Preview Right-Click Menu
Right-click within the Preview area to access the following menu:
Copy – use this command to copy the current preview to the Windows Clipboard.
Zoom In – use this command to incrementally zoom in.
Zoom Out – use this command to incrementally zoom out.
Show Print Region – use this command to show the region that will print.
Show Grid – use this command to show grid lines in the preview area. Note the grid lines will not be displayed on your printout.
Export to Image – use this command to export the current preview as an image (PNG, JPEG, BMP, GIF, WMF, EMF). Additional Controls
Set as Default – use to set the predetermined settings on Pages and Advanced tabs of the dialog as default.