WorkspaceManager_Dlg-PrinterPropertiesFormPrinter Configuration for_AD

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Printer Configuration for dialogThe Printer Configuration for dialog

Summary

The Printer Configuration for dialog provides controls to define what is printed and which printing device to use.

Access

To access the Printer Configuration for and Print Preview dialogs, the UI.Unification.PrintPreviewDialog option in the  Advanced Settings dialog must be disabled. The Advanced Settings dialog is accessed by clicking the Advanced button on the System – General page of the Preferences dialog. If any changes are made in the Advanced Settings dialog, the software must be restarted in order for the changes to take effect.

When the UI.Unification.PrintPreviewDialog option is enabled, the Print dialog is used for defining what is printed and which printing device to use, viewing printouts, and editing their setup definitions before actually printing.

The dialog is accessed in the following ways:

  • From the schematic or PCB editor, click File » Print.
  • Right-click on a document entry in the Projects panel then choose Print from the context menu (when available).
  • Click Print or Printer Setup in the associated Print Properties dialog for the document type (accessed using the relevant Page Setup control).
  • From the Print Preview dialog, click Print at the bottom of the dialog or right-click then choose Print or Setup Printer from the context menu.

Options/Controls

  • Printer
    • Name - this field reflects the current printer to which the printed output will be sent. Use the drop-down to choose another printer from all those currently installed for your computer. Depending on the chosen printing device, the following fields (below the Name field) will populate with read-only information about that device:
      • Status - the current state of the selected printer. For example, if the printer is online and able to accept print jobs, its status will be Ready.
      • Type - the type of printing device selected.
      • Where - where the printer physically resides, or the port to which it is connected.
      • Comment - any comment for the device.
    • Properties - click the button to display the printer driver dialog for the chosen printer. From this dialog you can define the paper source, layout and gain access to advanced property settings for the printer.
    • Retrieve Defaults - click this button to retrieve the default settings for the chosen printer from the current printer driver for that device installed on your computer.
    • Set Defaults - click this button to set the default settings for the current printer driver.
  • Print Range - use the controls in this region to specify which pages are to be printed when the prospective print job includes multiple pages. Choose one of the following options:

    • All Pages - enable this option to print all pages in relation to the print-based output being generated.
    • Current Page - enable this option to print only the selected page.

      When printing from within the Print Preview dialog, you can choose the current page as determined by a red border, but if printing directly, the current page will always be page number 1 (the first page presented when the pages are loaded into the Print Preview dialog).
    • Pages - enable this option to print a range of pages. Use the From and To fields to specify the start and end pages (inclusive) in the required range.

      Print Range controls are only meaningful when the Print What option is set to Print All Valid Documents.
  • Copies
    • Number of copies - use this field to specify the number of copies of the page (or page set) to be printed.
      • Collate - enable this option to print the copies of the document(s) in proper binding order. For example, for a print job involving 3 pages, and 2 copies, enabling this option will generate collated output (1,2,3; 1,2,3). Disabling this option will produce uncollated output (1,1; 2,2; 3,3).
  • Print What - use the control in this region of the dialog to specify what is to be printed. Choose one of the following options from the drop-down listing:

    • Print Active Document - choose this option to print only the active document.
    • Print All Valid Documents - choose this option to print all documents of the same type (schematic, PCB, or text) that have been added to the active design project.
    • Print Selection - choose this option to print only those selected objects on the active document.
    • Print Screen Region - choose this option to print only the region of the active document that is visible within the main design window.

      This control could be thought of as print 'filtering'. You can confirm what each option is 'filtering' by accessing the Print Preview dialog to see that you are printing exactly what you expect.
  • Printer Options
    • Printer Job Options - use the options available from the drop-down to determine how the output is sent to the Windows Print Queue. Choices include:
      •  Print as a single printer job
      •  Print as multiple printer jobs
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.