Parent page: More about Collaborative Design
The Workflow Process
Human error, poor design decisions, incomplete supply chain checks - there are many issues that can, and do, occur during the design and development of an electronic product. To avoid errors such as these validation check points are needed; such as design reviews and sign-off check lists.
Every organization that develops electronic products has systems in place to manage the flow of work through their organization. For a sole operator it could be following a sequence of steps that have been learned through experience. In a small company it might be informal peer-to-peer design reviews at agreed points in the development cycle. For a larger company it might be a series of review checklists that are signed off at critical stages, or request forms that are filled out when a new component needs to be added to the company database, using in-house developed forms and databases to manage and store the results.
The challenge with using a separate workflow management system is keeping it connected and in-sync with the design data. Ideally, the workflow management process will be tightly coupled to the design process, reducing the chance for human error and insuring that the history it captures can be reviewed against the history of the design documents.
Modeling the Workflow Processes in Electronic Design
An excellent way to model any workflow process is as a diagram. A good diagram will show all of the steps in that process and their sequence, it will include key decision points, and the paths to follow for all possible outcomes.
What a flat diagram, like a Visio® diagram lacks, is a way of capturing the detail behind each step, or a way of connecting into the broader company systems and design tools. It also lacks a way of building accountability into the process, unlike a checklist that must be signed off before the design can proceed. Another big challenge with capturing a process in a diagram is that the detail that is considered to be important, is often different from one organization to the next. To satisfy these requirements you need to move beyond the Visio diagram and the checklist typed up in Word®.
Altium NEXUS solves these challenges with interaction diagrams. An interaction diagram provides a method of capturing a workflow process in a graphical format.
Behind each Task element in that diagram, the diagram creator builds user-interaction by crafting user forms. The forms can be used to: provide information to the designer about the purpose of this workflow diagram; require information to be entered, or files attached; select an option from a dropdown list; and so on.
An interaction diagram can capture:
- Who is involved (e.g. admin, design engineer, anyone from the librarian group, etc)
- What actions needs to be taken, and in which order
- What data needs to be provided (name, description, attachments, etc)
- What are the decision points (e.g. approvals, assignments, etc)
The User Form presents as a dialog in Altium NEXUS when the designer starts a workflow process, such as a parts request or design review, or when they are specifically tasked with an action in a workflow process. The images below show the form design for initiating a design review (on the left), as it is designed in the NEXUS Server, and that form as it presents as a dialog in Altium NEXUS.
The user form for a design review shown on the left, designed in the NEXUS Server as part of the Design Review workflow definition.
It presents in Altium NEXUS as a dialog (on the right) for the designer to complete when a Design Review is initiated.
Workflow Process Quick TipsExpand折叠
- Interaction Diagrams are created and managed in the Processes section of the NEXUS Server, you must be an Admin to create or edit a Process. Create a new Process, or edit an existing template and save it with a new name.
- Each Task in the Process has a Form, during Process editing click to select it, then edit the Form contents on the right.
- Processes are then added to a project in the relevant section of the NEXUS Server (Projects or Part Requests), or relevant menu in Altium NEXUS. Refer to the Using a Workflow Process section to learn more.
- As well as the initial Form that presents when the workflow process is launched, each Task in the workflow also has a form. These present as Tasks in the Tasklist panel, for the designer that the task is assigned to. Click on the Task in the upper section of the panel to open the user Form, the Diagram can also be accessed from the same dialog. More on this in the Monitoring the Tasks section.
Creating and Editing Interaction Diagrams
Main articles: Creating & Managing Processes
An interaction diagram is used to model a Workflow Process. Processes (and their interaction diagrams) are created and managed in the Altium NEXUS Server, which you access through a web browser. Note that you must be logged in with administrator permissions to access the Processes section of the NEXUS Server, to edit or define a new process. Refer to the page, Creating & Managing Processes, to learn more.
Existing processes are edited and new ones created in the Process Workflow Editor.
The editor is accessed in the NEXUS Server through a web browser, when signed in with administrator permissions.
As well as the supplied template workflow processes, user-defined processes can also be created, allowing you to model that process to the depth and detail required by your organization.
To help organize and manage process diagrams, they are grouped into themes. A theme is simply a set of process diagrams that model the same type of workflow, for example: new Project Creation, new Part Requests or Design Reviews.
Working in the Workflow Process EditorExpand折叠
- When Processes are selected in the tree on the left (as shown in the image above), four Tabs appear across the top of the editor. The Browser tab shows all active processes currently in use in any managed project stored on the NEXUS Server. The other Tabs give access to each Theme, or type of workflow process.
- New processes are created and existing processes are edited in one of the Theme Tabs.
- Each time a process is edited and saved, a new version is created. Use the Latest/All dropdown to access an older version.
- To abort editing a process, click the browser back button.
- Processes are not added to a project here in the Processes section of the Server, they are added in the Projects section. This is detailed in the Using a Workflow Process section.
Refer to the Creating & Managing Processes page for a detailed explanation of the Workflow Process editor.
The Elements of a Interaction Diagram
Main article: Defining a Process Workflow - The Workflow Diagram
The interaction diagram presents like a flow-chart, drawn from a set of shaped objects, called elements. Each element represents a type of action or event that is to occur at a point in time. The sequence of events is from left to right, apart from the output from a decision Branch, which can flow from right to left.
An interaction diagram is created from a set of elements. Each type of diagram (theme), for example Project Creation, will have access to a specific set of elements, an example is shown below:
The palette of elements that displays at the top of the Process Workflow Editor
during editing, hover the cursor for information about an element.
Capturing the Data and Events in the Interaction Diagram
Main article: Defining a Process Workflow - Building a Form
Once the workflow process has been designed as an interaction diagram, the data required to fully detail that process is captured in one or more User Forms. The User Form can carry information about that stage of the process, require the user to select an option or enter feedback, link to related information (such as a datasheet), and so on.
User Forms are created for the Start element and for each of the Task elements. When one of these types of elements is clicked on in the diagram, the current user form settings are displayed in the pane to the right of the process editor, or if the form has not yet been defined, a Create Form button is displayed.
A User Form is created for the Start element and each Task element in a process diagram.
Notes on Building a FormExpand折叠
When data is added to a Form, that data becomes available for use in other Forms created in that workflow process.
The workflow definition and associated forms are created in the NEXUS Server. The workflow definition and the forms can then be used in either the NEXUS Server, or in Altium NEXUS.
Using a Workflow Process
So how do you use a workflow process in your organization? Rather than being accessed through a single entry point, the workflow management features are integrated into appropriate interface locations in the Altium NEXUS design client. they can also be accessed in the NEXUS Server, in your browser.
The designer must be ![]()
signed in to a NEXUS Server to access any of the workflow processes.
The option to create each kind of workflow process will only be available if there is at least one process of that type defined in the connected NEXUS Server.
You access each type of workflow process in the following ways.
Raising a Part Request - In Altium NEXUS
The available part request workflow processes are created and edited in the Part Requests tab (theme) of the NEXUS Server.
A new part request can be raised after performing a search for a component in the Explorer panel. After the search is complete, look for the Submit Request button at the top right of the panel. When this is clicked, the menu will list all of the workflow processes available in the Part Request theme, on the connected NEXUS Server.
After choosing your preferred workflow process, the User Form associated with the Start element of that workflow process is opened, ready to be filled in.
A new Part Request can be raised after performing a search in the Explorer panel.
Alternatively, a new part request can be raised via the Part Search panel. After performing a search, the panel will include a a Submit Request button, click the button to display a menu listing all of the workflow processes available in the Parts Request theme. The advantage of this approach is that key information is automatically entered into the User Form, including data sheets and parametric information.
Raising a Part Request - In the NEXUS Server
A new Part Request can also be raised from within the NEXUS Server. Select Part Requests in the menu on the left, then click the Submit Request button to access the available workflow processes, as shown below. After choosing your preferred workflow process, the User Form associated with the Start element of that workflow process is opened, ready to be filled in.
A Part Request can also be raised in the NEXUS Server.
Refer to the Parts Request section of the Creating & Managing Processes page for detailed information.
New Project Creation
To start a new project creation workflow process:
- In Altium NEXUS, select File » New » Managed Project, or
- In the NEXUS Server (open in your browser), select Projects in the navigation tree, then click the Add Project button.
The New Project workflow process can be launched from Altium NEXUS, or from the NEXUS Server, hover the cursor over the image to see the difference.
All available Project Creation workflow processes will be listed in the menu. After choosing the required workflow, its User Form will open.
Alternatively, an existing project can be cloned. This will create a complete copy of the project, including all documents in that project. To clone an existing project:
- In the Open Managed Project dialog, right-click on an existing project and select Clone from the context menu, or
- In the NEXUS Server, select Projects in the navigation tree, click on the project to be cloned,
Alternatively, an existing project can be cloned in Altium NEXUS or from the NEXUS Server, hover the cursor over the image to see the difference.
All available Project Creation workflow processes will be listed in the menu. After choosing the required workflow, its User Form will open.
Refer to the Project Creation section of the Creating & Managing Processes page for detailed information.
Performing a Design Review
Design review workflow processes are classified as Project Activities, they are created and edited in the Project Activities tab (theme) of the NEXUS Server.
To launch a design review, select the required workflow process:
- In Altium NEXUS, select the required review from the Project » Project Activities sub-menu.
- In NEXUS Server, click the Activities button to display a menu of the available design review workflow processes.
A Design Review can be launched from either Altium NEXUS or from the NEXUS Server, hover the cursor over the image to see the different approaches.
Refer to the Project Activities section of the Creating & Managing Processes page for detailed information.
Monitoring and Actioning the Tasks
Related pages: Tasklist panel, NEXUS Server Browser-based Access & Management
If a designer has been defined as a participant in a workflow process (their NEXUS Server username has been entered into a field in a form), they will have a task assigned to them.
In Altium NEXUS, that task will present in the Tasks region of the Tasklist panel. When the designer clicks on the task, the workflow process dialog for that task will open.
Click on a task in the Tasklist panel, to open the dialog for that task.
In the NEXUS Server, that task will present in the Tasks section of the server, as shown below.
All users can also access their Tasks in the NEXUS Server, in the Tasks section.
If you are an administrator, when you select Tasks in the NEXUS Server all tasks assigned to you will be listed. Clear your name from the Search field and press enter to display all Tasks that are currently active, for all users.
The Tasklist panel has two sections, labeled Tasks and Activities.
- Tasks - tasks require user-interaction, the assigned designer must open the task and complete the relevant steps in the dialog. When the assigned designer completes their steps they click Submit in the dialog, indicating they have completed that task. If that task requires the input of multiple designers, that task is not considered complete until all assigned designers have clicked Submit. Once that has occurred, subsequent tasks in that that workflow will present in the Tasklist of each of the assigned designers.
- Activities - this section of the panel lists the Activities, or workflows, that the current user has initiated. It does not mean that the current user is required to complete a Task as part of that workflow, the Activities section reflects the workflows that this user has created. Click on an activity to open a dialog that displays the workflow diagram (as shown below), the diagram will include a blue icon indicating which task the workflow is currently up to, and which designer(s) that task is waiting on.
The diagram for a workflow launched by the signed-in user. The blue icon indicates which task the workflow process is currently up to, and who it is waiting on.
