Altium NEXUS Documentation

BringObjectToFrontOf

Created: September 27, 2017 | Updated: July 27, 2018

Parent page: Schematic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to move one object in front of another object in a stack of overlapping objects. The Schematic Editor/Schematic Library Editor automatically stacks objects, text and graphics in layers. Each object is on a different layer depending on the creation order and, therefore, it is possible to place objects so that they overlap. The objects created or added recently are always on the top layer.

Access

This command can be accessed from the Schematic Editor and the Schematic Library Editor by:

  • Choosing the Edit » Move » Bring To Front Of command from the main menus.
  • Locating and using the Bring To Front Of command () on the Active Bar.
If the command has been recently used from the Active Bar, it will become the active/visible button. Where other commands are available, this is indicated by a triangle at the bottom-right corner of the button. Click and hold on the active button to access a menu of all associated commands for that grouping.

Use

After launching the command, the cursor will change to a crosshair and you will be prompted to choose an object to move. Position the cursor over the object that you want to move then click or press Enter. You will then be prompted to choose an object that you wish to move the first object in front of. Position the cursor over this 'target' object then click or press Enter. The first object will be moved in front of this target object without changing its x or y coordinates.

Continue moving further objects, or right-click or press Esc to exit movement mode.

Tips

  1. When selecting the initial or target objects, if you click on an area where multiple possible objects overlap, a pop-up will appear containing all overlapping objects from which you can choose the desired object.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: