Altium NEXUS Documentation

SwapSelectedSheetEntrySide

Created: September 27, 2017 | Updated: September 27, 2017

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: ObjectKind=SheetEntry

Summary

This command is used to quickly swap sides for all selected sheet entries, on the current schematic sheet, simultaneously, and irrespective of sheet symbol to which they are associated.

Access

This command can be accessed in the Schematic Editor, by:

  • Choosing the Edit » Move » Swap Selected Sheet Entries Side command from the main menus.
  • Locating and using the Swap Selected Sheet Entries Side command () on the Active Bar.
If the command has been recently used from the Active Bar, it will become the active/visible button. Where other commands are available, this is indicated by a triangle at the bottom-right corner of the button. Click and hold on the active button to access a menu of all associated commands for that grouping.
The command will only be available provided at least one sheet entry is currently selected on the active schematic sheet.

Use

After launching the command, each selected sheet entry will be relocated to the directly opposite side of its parent sheet symbol.

Tips

  1. Sheet entry I/O Type is not changed by the swap.


Applied Parameters: ContextSensitive=True|ObjectKind=SheetEntry

Summary

This command is used to quickly swap sides for one or more sheet entries, on the current schematic sheet, simultaneously.

Access

This command is accessed in the Schematic Editor, by:

  • Right-clicking over a placed sheet entry (not selected) and choosing the Sheet Entry Actions » Swap Sheet Entry Side command from the context menu.
  • Right-clicking over a selected sheet entry (or a sheet entry that is part of a group of selected sheet entries) and choosing the Sheet Entry Actions » Swap Selected Sheet Entries Side command from the context menu.

Use

After launching the command, each sheet entry involved in the swap will be relocated to the directly opposite side of its parent sheet symbol.

Tips

  1. Sheet entry I/O Type is not changed by the swap.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: