Altium NEXUS Documentation

Jump

Modified by Jason Howie on Aug 4, 2017
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Origin=TRUE

Summary

This command is used to move the cursor to the absolute origin coordinate (0,0) for the current document. The abosulte origin point corresponds to the bottom-left corner of the schematic sheet.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » Jump » Origin command from the main menus.
  • Using the Ctrl+Home keyboard shortcut.
  • Within the main design workspace, pressing the J key, then choosing Origin from the subsequent pop-up menu (or using the J, O keyboard sequence).

Use

After launching the command, the cursor will jump to the absolute origin for the document (coordinate 0,0). The coordinate will be zoomed and centered (where possible) in the main design window.


Applied Parameters: NewLocation=TRUE

Summary

This command is used to conveniently move the cursor to any location within the current document, based on user-specified XY coordinates.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » Jump » New Location command from the main menus.
  • Within the main design workspace, pressing the J key, then choosing New Location from the subsequent pop-up menu (or using the J, L keyboard sequence).

Use

After launching the command, the Jump To Location dialog will appear. Enter values for the X and Y coordinates within the workspace, for the location you wish the cursor to jump to. After clicking OK, the cursor will be moved to the specified coordinate, and the coordinate will be zoomed and centered (where possible) within the main design window.


Applied Parameters: LocationMark=n (where n is in the range 1 to 10)

Summary

This command is used to jump to a position in the current document, whose coordinates have been previously stored in the indicated location marker.

Access

This command can be accessed from the Schematic Editor by:

  • Choosing the Edit » Jump » Location Marks » n command, from the main menus.
  • Within the main design workspace, pressing the J key, then choosing Location Marks » n from the subsequent pop-up menu (or using the J, M, n keyboard sequence - where n = 0 for location mark 10).

Use

After launching the command, the cursor will jump to the position that has been stored in the indicated location marker, becoming centered (where possible) in the main design window.

Tips

  1. If no location has been stored in a marker, the cursor will remain at the current location.
  2. A stored location - stored using the Edit » Jump » Location Marks » n command - is only available while the schematic document remains open (active or not). If the document is closed and opened again, the location marker will be empty.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。