Altium NEXUS Documentation

ToggleIOTypeInSelectedSheetSymbol

Created: September 27, 2017 | Updated: January 30, 2019

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: ObjectKind=SheetSymbol

Summary

This command is used to toggle the I/O Type for all sheet entries in one or more selected sheet symbols, simultaneously, and where applicable.

Access

This command can be accessed in the Schematic Editor, by:

  • Choosing the Edit » Move » Toggle All Sheet Entries IO Type In Selected Sheet Symbols command from the main menus.
  • Locating and using the Toggle All Sheet Entries IO Type In Selected Sheet Symbols command on the Active Bar.
If the command has been recently used from the Active Bar, it will become the active/visible button. Where other commands are available, this is indicated by a triangle at the bottom-right corner of the button. Click and hold on the active button to access a menu of all associated commands for that grouping.
The command will only be available provided at least one sheet symbol is currently selected on the active schematic sheet.

Use

After launching the command, the I/O Type defined for each sheet entry will be toggled, where applicable. The actual change depends on the current I/O Type as follows:

  • Unspecified remains Unspecified.
  • Output changes to Input.
  • Input changes to Output.
  • Bidirectional remains Bidirectional.

Tips

  1. This command acts only on standard sheet symbols, and not device sheet symbols, or managed sheet instance symbols.


Applied Parameters: ContextSensitive=True|ObjectKind=SheetSymbol

Summary

This command is used to toggle the I/O Type for all sheet entries in one or more sheet symbols, simultaneously, and where applicable.

Access

This command is accessed in the Schematic Editor, by:

  • Right-clicking over a placed sheet symbol (not selected) and choosing the Sheet Symbol Actions » Toggle All Sheet Entries IO Type In Sheet Symbol command from the context menu.
  • Right-clicking over a selected sheet symbol (or a sheet symbol that is part of a group of selected sheet symbols) and choosing the Sheet Symbol Actions » Toggle All Sheet Entries IO Type In Selected Sheet Symbol command from the context menu.

Use

After launching the command, the I/O Type defined for each sheet entry will be toggled, where applicable. The actual change depends on the current I/O Type as follows:

  • Unspecified remains Unspecified.
  • Output changes to Input.
  • Input changes to Output.
  • Bidirectional remains Bidirectional.

Tips

  1. This command acts only on standard sheet symbols, and not device sheet symbols, or managed sheet instance symbols.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: