Altium NEXUS Documentation

CrossProbe

Created: August 25, 2017 | Updated: April 13, 2018

Parent page: ActiveBOM Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to cross probe from a chosen BOM Item in the current ActiveBOM document (*.BomDoc) and highlighting its corresponding counterpart on the schematic document. Cross-probing is a powerful searching tool to help locate objects in other editors by selecting the object in the current editor. If the project PCB is currently open, the PCB component will also be cross probed to.

To learn more about cross probing and cross selection, refer to the Cross-Probing and Selecting page.

For a high-level look at working with the ActiveBOM, see BOM Management with ActiveBOM.

Access

This command can be accessed in ActiveBOM by:

  • Choosing the Tools » Cross Probe command from the main menus.
  • Right-clicking on the BOM Item and selecting Cross Probe » <ComponentDesignator TargetSchematic> from the context menu.

Use

Cross probing is available when a BOM Item is selected in the ActiveBOM component grid. After selecting a component and launching the command, the target schematic will automatically open, and the component highlighted. If the project PCB is currently open, the PCB component will also be highlighted.

The cross-probed objects on the target document will be displayed in accordance with the Highlight Methods defined on the System - Navigation page of the Preferences dialog.

During Cross Probing, it is more efficient to have the BomDoc (source) and schematic (target) documents displayed side-by-side, either by splitting the main design window, or opening the schematic in a new window. Commands for both of these are available in the document tab right-click menu.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: