Select Device Sheet

Now reading version 2.1. For the latest, read: Select Device Sheet for version 5

Nexus message

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Select Device Sheet dialog
The Select Device Sheet dialog

Summary

The Select Device Sheet dialog provides controls to select a device sheet to be placed in the schematic sheet.

Access

From the schematic editor, this dialog is accessed in the following ways:

  • Select Place » Device Sheet Symbol from the toolbar.
  • Right-click then select Place » Device Sheet Symbol from the context menu.
  • Click  in the Active Bar.
  • Click the  button on the Wiring toolbar.

Options/Controls

  • Device Sheet Folders List - the left side of the dialog lists all source device sheet folders added to the project.
  • Filter - enter the desired characters to filter target devices sheets.
  • Device Sheets List - the right side of the dialog list all devices sheets that exist in the selected folder.
  • Device Sheet Folders - click to open the Device Sheet Folders dialog in which you can add, remove, or reorder source device sheet folders. 
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.