Altium NEXUS Documentation

ZoomToFit

Created: May 23, 2019 | Updated: May 23, 2019

Parent page: MultiBoardAssembly Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action=Scene

Summary

This command is used to display all parts in the active Multi-board Assembly document (*.MbaDoc), within the main design window.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Fit All Objects command from the main menus.
  • Using the Ctrl+PgDn keyboard shortcut.

Use

After launching the command, the view in the main design window will change to present all parts in the assembly, centered within the workspace.


Applied Parameters: Action=Selection

Summary

This command is used to display all currently selected parts in the active Multi-board Assembly document (*.MbaDoc), within the main design window.

For a high-level look at multi-board design within Altium NEXUS, see Designing Systems with Multiple Boards.

Access

With at least one part (assembly, board, or body) selected in the workspace, this command can be accessed from the Multi-board Assembly Editor by:

  • Choosing the View » Fit Selection command from the main menus.
  • Using the Shift+Ctrl+PgDn keyboard shortcut.

Use

After launching the command, the view in the main design window will change to present all selected parts in the assembly, zoomed and centered (where possible) within the workspace.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: