Altium NEXUS Documentation

GroupPrimitives

Created: January 1, 2021 | Updated: March 10, 2021

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action=Explode | Object=Component

Summary

This command is used to convert a Component object back to its original set of primitive parts.

Access

This command is accessed from the PCB Editor by choosing the Tools » Convert » Explode Component to Free Primitives command from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter component explode mode. Position the cursor over the component you wish to explode then click or press Enter. A confirmation dialog will appear - click Yes to proceed. An exploded component is no longer a component, so the designator and comment will be removed and the component will revert to the various primitives from which it was made.

Explode is a one-way process, there is no command to regroup an exploded component.

Continue converting further components to their free primitives or right-click or press Esc to exit component explode mode.

Tips

  1. Explode has no effect on the footprint model stored in the applicable source library, only on the converted instance(s) of the component(s) placed on the PCB document.
  2. Although there is no actual command to regroup an exploded component, you can use the Undo command to achieve this.
  3. The Explode command should not be used to modify the properties of a component. The primitives in a component can be edited by unlocking the component primitives, editing them as required, then re-locking the primitives. Refer to the Primitives section on the Component Properties page for information on how to do this.


Applied Parameters: Action=Explode | Object=Component|ContextObject=Component

Summary

This command is used to convert one or more Component objects back to their original sets of primitive parts.

Access

This command is accessed in the PCB Editor, by:

  • Right-clicking over a placed component (not selected) then choosing the Component Actions » Explode Component To Free Primitives command from the context menu.
  • Right-clicking over a selected component (or a component that is part of a group of selected components) then choosing the Component Actions » Explode Selected Components To Free Primitives command from the context menu.

Use

After launching the command, a confirmation dialog will appear - click Yes to proceed. An exploded component is no longer a component, so the designator and comment will be removed and the component will revert to the various primitives from which it was made.

Explode is a one-way process, there is no command to regroup an exploded component.

Tips

  1. Explode has no effect on the footprint model stored in the applicable source library, only on the converted instance(s) of the component(s) placed on the PCB document.
  2. Although there is no actual command to regroup an exploded component, you can use the Undo command to achieve this.
  3. The Explode command should not be used to modify the properties of a component. The primitives in a component can be edited by unlocking the component primitives, editing them as required, then re-locking the primitives. Refer to the Primitives section on the Component Properties page for information on how to do this.


Applied Parameters: Action=Explode | Object=Dimension

Summary

This command is used to convert a Dimension object back to its original set of primitive parts.

A dimension object can be one of the following types: Angular, Linear, Ordinate, Original, and Radial.

Access

This command is accessed from the PCB Editor by choosing the Tools » Convert » Explode Dimension to Free Primitives command from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter dimension explode mode. Position the cursor over the dimension you wish to explode then click or press Enter. A confirmation dialog will appear - click Yes to proceed. The dimension will revert to the various primitives from which it was made.

Continue converting further dimensions to their free primitives or right-click or press Esc to exit dimension explode mode.

Tips

  1. Although there is no actual command to regroup an exploded dimension, you can use the Undo command to achieve this.


Applied Parameters: Action=Explode | Object=Polygon

Summary

This command is used for converting a Polygon Pour object back to its original set of primitive parts.

Access

This command is accessed from the PCB Editor by choosing the Tools » Convert » Explode Polygon to Free Primitives command from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter polygon pour explode mode. Position the cursor over the polygon pour you wish to explode then click or press Enter. A confirmation dialog will appear - click Yes to proceed. The polygon pour will revert to the various primitives from which it was made.

Continue converting further polygon pours to their free primitives or right-click or press Esc to exit polygon pour explode mode.

Tips

  1. Although there is no actual command to regroup an exploded polygon pour, you can use the Undo command to achieve this.


Applied Parameters: Action=Explode | Object=Polygon|ContextObject=Polygon

Summary

This command is used to convert one or more Polygon Pour objects back to their original sets of primitive parts.

Access

This command is accessed in the PCB Editor, by:

  • Right-clicking over a placed polygon pour (not selected) then choosing the Polygon Actions » Explode Polygon To Free Primitives command from the context menu.
  • Right-clicking over a selected polygon pour (or a polygon pour that is part of a group of selected polygon pours) then choosing the Polygon Actions » Explode Selected Polygons To Free Primitives command from the context menu.

Use

After launching the command, a confirmation dialog will appear - click Yes to proceed. Each polygon pour will revert to the various primitives from which it was made.

Tips

  1. Although there is no actual command to regroup an exploded component, you can use the Undo command to achieve this.


Applied Parameters: None

Summary

This command is used to add new primitive design objects to a Component object when graphically modifying the shape of the component directly within the PCB Editor.

Access

This command is accessed from the PCB Editor by choosing the Tools » Convert » Add Selected Primitives to Component command from the main menus.

Use

First, place new primitives as required in the workspace then select these new primitives and launch the command. The cursor will change to a cross-hair and you will be prompted to choose a component. Position the cursor over the component that you want to add the selected primitives to and click or press Enter.

A confirmation dialog will appear asking whether you wish to go ahead and add the selected primitives to the component. Clicking YES will mean that the new primitives will be recognized as part of the single component object and may be used in conjunction with the component's original primitives to edit the shape of the component as required.

Tips

  1. The target component must have its primitives unlocked to carry out this operation, otherwise a dialog will appear alerting you to this fact and the action will be aborted. You can unlock the primitives that make up the component while viewing the properties for the selected component in the Properties panel. Click the padlock button () to the right of the Primitives option at the bottom of the Properties section of the panel.
  2. The properties of component pads can be modified without unlocking the primitives.


Applied Parameters: Action=Explode|Object=BoardRegion|BoardPlanningMode=True

Summary

This command is used for converting a Board Region object back to its original set of primitive parts.

Access

This command is accessed from the PCB Editor when in Board Planning Mode by choosing the Tools » Convert » Explode Region to Free Primitives command from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter board region explode mode. Position the cursor over the board region you wish to explode then click or press Enter. A confirmation dialog will appear - click Yes to proceed. The board region will revert to the various primitives from which it was made.

Tips

  1. Although there is no actual command to regroup an exploded board region, you can use the Undo command to achieve this.


Applied Parameters: Action=Explode|Object=BoardCutout|BoardPlanningMode=True

Summary

This command is used for converting a board cutout back to its original set of primitive parts.

Access

This command is accessed from the PCB Editor when in Board Planning Mode by choosing the Tools » Convert » Explode Board Cutout to Free Primitives command from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter board cutout explode mode. Position the cursor over the board cutout you wish to explode then click or press Enter. A confirmation dialog will appear - click Yes to proceed. The board cutout will revert to the various primitives from which it was made.

Tips

  1. Although there is no actual command to regroup an exploded board cutout, you can use the Undo command to achieve this.


Applied Parameters: Action=Explode | Object=Coordinate

Summary

This command is used for converting a Coordinate object to its original set of primitive parts.

Access

This command is accessed from the PCB Editor by choosing the Tools » Convert » Explode Coordinate to Free Primitives command, from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter coordinate explode mode. Position the cursor over the coordinate you wish to explode and click, or press Enter. A confirmation dialog will appear - click Yes to proceed. The coordinate will revert to the various primitives that it was made up from.

Continue converting further coordinates to their free primitives, or right-click, or press Esc, to exit coordinate explode mode.

Tips

  1. Although there is no actual command to regroup an exploded coordinate, you can use the Undo command to achieve this.


Applied Parameters: Action=Explode|Object=BendLine|BoardPlanningMode=True

Summary

This command is used for converting a Bending Line object back to its original set of primitive parts.

Access

This command is accessed from the PCB Editor when in Board Planning Mode by choosing the Tools » Convert » Explode Bend Line command from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter bending line explode mode. Position the cursor over the bending line you wish to explode, then click or press Enter. A confirmation dialog will appear - click Yes to proceed. The bending line will revert to the various primitives from which it was made.

Tips

  1. Although there is no actual command to regroup an exploded board cutout, you can use the Undo command to achieve this.


Applied Parameters: Action=Explode | Object=Rectangle

Summary

This command is used for converting a Rectangle object to its original set of primitive parts.

Access

This command is accessed from the PCB Editor by choosing the Tools » Convert » Explode Rectangle to Free Primitives command, from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter rectangle explode mode. Position the cursor over the rectangle you wish to explode and click, or press Enter. A confirmation dialog will appear - click Yes to proceed. The rectangle will revert to the various primitives that it was made up from.

Continue converting further rectangles to their free primitives, or right-click, or press Esc, to exit rectangle explode mode.

Tips

  1. Although there is no actual command to regroup an exploded rectangle, you can use the Undo command to achieve this.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

お問合せ

お近くの営業所にお問合せください。

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 無償評価版
Altium Designer 無償評価版
Altium Designerを使用していますか?

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

評価版ライセンスが必要な理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、評価版ライセンスは不要です。

ボタンをクリックして、最新のAltium Designerインストーラをダウンロードしてください。

Altium Designerインストーラをダウンロードする

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

Altium Designerの新規ライセンスのお見積もりをご希望の場合、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerサブスクリプションをご利用中の場合、評価版ライセンスは不要です。

お客様がAltium Designerサブスクリプションの有効なメンバーではない場合、下記のフォームに入力して無償評価版をダウンロードしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerを評価する理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

無償評価版を使用するには、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

素晴らしいですね。アルティウムではモノづくりに最適なプログラムを提供しています。

Upverterは、コミュニティ主導型の無償プラットフォームで、お客様のような作り手の要求に合わせて設計されています。

試してみる場合、こちらをクリック してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。