Altium NEXUS Documentation

SnappingOptions

Created: April 17, 2019 | Updated: August 25, 2021

Parent page: PCB Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action=ShowFilterDialog

Summary

This command is used to access the snapping options.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking the  on the Active Bar.

Use

After launching the command, a pop-up opens that displays all the available objects for snapping. 

Tips

  1. A selected object displays in blue; a non-selected object displays in gray.
  2. Select All Objects to choose all objects in the PCB.


Applied Parameters: Axises=Toggle

Summary

This command is used to toggle the Axes snapping option on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCBLIB editors by clicking Ctrl+E, then selecting Axes. Once selected, the Axes button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Axes snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: Grids=Toggle

Summary

This command is used to toggle the Grids snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCBLIB editors by clicking Ctrl+E, then selecting Grids. Once selected, the Grids button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Grids snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: Guides=Toggle

Summary

This command is used to toggle the Guides snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCBLIB editors by clicking Ctrl+E, then selecting Guides. Once selected, the Guides button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Guides snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: TrackArcsVertexes=Toggle

Summary

This command is used to toggle the Track Vertices snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Track Vertices. Once selected, the Track Vertices button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Track Vertices snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: TrackArcsLines=Toggle

Summary

This command is used to toggle the Track Lines snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Track Lines. Once selected, the Track Lines button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Track Lines snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: Intersections=Toggle

Summary

This command is used to toggle the Intersections snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Intersections. Once selected, the Intersections button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Intersections snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: PadCenters=Toggle

Summary

This command is used to toggle the Pad Centers snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Pad Centers. Once selected, the Pad Centers button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Pad Centers snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: PadVertexes=Toggle

Summary

This command is used to toggle the Pad Vertices snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Pad Vertices. Once selected, the Pad Vertices button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Pad Vertices snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: PadEdges=Toggle

Summary

This command is used to toggle the Pad Edges snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Pad Edges. Once selected, the Pad Edges button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Pad Edges snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: ViaCenters=Toggle

Summary

This command is used to toggle the Via Centers snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Via Centers. Once selected, the Via Centers button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Via Centers snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: RegionsPolygonsFills=Toggle

Summary

This command is used to toggle the Regions snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Regions. Once selected, the Regions button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Regions snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: BoardShape=Toggle

Summary

This command is used to toggle the Board Shape snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB editor by clicking Ctrl+E, then selecting Board Shape. Once selected, the Board Shape button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Board Shape snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: FootprintOrigins=Toggle

Summary

This command is used to toggle the Footprint Origins snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Footprint Origins. Once selected, the Footprint Origins button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Footprint Origins snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: 3DbodySnapPoints=Toggle

Summary

This command is used to toggle the 3D Body Snap Points snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting 3D Body Snap Points. Once selected, the 3D Body Snap Points button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the 3D Body Snap Points snapping option will be toggled on or off depending upon the status when the command was run.


Applied Parameters: Texts=Toggle

Summary

This command is used to toggle the Texts snapping options on or off.

For more information regarding Snapping Options, visit the PCB Grids System page.

Access

This command is accessed from the PCB and PCB Library editors by clicking Ctrl+E, then selecting Texts. Once selected, the Texts button will become blue (on). When it is unselected, it will be gray (off).

Use

After launching the command, the Texts snapping option will be toggled on or off depending upon the status when the command was run.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

お問合せ

お近くの営業所にお問合せください。

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 無償評価版
Altium Designer 無償評価版
Altium Designerを使用していますか?

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

評価版ライセンスが必要な理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、評価版ライセンスは不要です。

ボタンをクリックして、最新のAltium Designerインストーラをダウンロードしてください。

Altium Designerインストーラをダウンロードする

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

Altium Designerの新規ライセンスのお見積もりをご希望の場合、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerサブスクリプションをご利用中の場合、評価版ライセンスは不要です。

お客様がAltium Designerサブスクリプションの有効なメンバーではない場合、下記のフォームに入力して無償評価版をダウンロードしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerを評価する理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

無償評価版を使用するには、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

素晴らしいですね。アルティウムではモノづくりに最適なプログラムを提供しています。

Upverterは、コミュニティ主導型の無償プラットフォームで、お客様のような作り手の要求に合わせて設計されています。

試してみる場合、こちらをクリック してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。