PCB_Dlg-Reconnect_OptionsFormSubnet Connector_AD
Created: февраля 09, 2023 | Updated: февраля 09, 2023
| Applies to version: 22
This document is no longer available beyond version 22. Information can now be found here: Adding Subnet Jumpers for version 25
The Subnet Connector dialog
Summary
The Subnet Connector dialog provides controls to specify the maximum subnet separation.
Access
The dialog is accessed by clicking Route » Add Subnet Jumpers from the main menus.
Options/Controls
- Maximum Subnet Separation - enter a value for the maximum subnet separation (100mil is the default value) of incomplete routing segments.
- Run - click to automatically add subnet connectors to complete short routing segments (tracks that still have connection lines in between) on the current PCB document.