Altium NEXUS Documentation

HighlightAll

Created: 11.06.2016 | Updated: 11.04.2017
Вы просматриваете версию 3.2. Для самой новой информации, перейдите на страницу для версии 5

Parent page: CAMtastic Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to toggle the highlighting of objects based on the current Dcode. In this way, you can interrogate exactly which objects a particular Dcode is associated with.

Access

This command can be accessed from the CAMtastic Editor by:

  • Choosing the View » Views » Highlight Dcode command from the main menus.
  • Clicking the  button, on the Miscellaneous Tools drop-down () of the Utilities toolbar.
  • Using the Shift+H keyboard shortcut.

Use

First, ensure that the Dcode for the objects you wish to highlight is selected in the Dcode field on the CAMtastic panel.

After launching the command, all objects on all enabled layers that use the current Dcode will become highlighted, and the Status Bar will reflect the total number of highlighted objects. Using the command again for the same Dcode will remove the highlighting.

Tips

  1. Highlighting only affects objects drawn with the current Dcode. If you change the current Dcode in the CAMtastic panel and run the command again, only those objects for this selected (now current) Dcode will be highlighted.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: