Altium Designer Documentation

LayerDown

Using Altium Documentation
Created: December 5, 2018 | Updated: January 17, 2019
Now reading version 20.1. For the latest, read: LayerDown for version 21
Applies to Altium Designer versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: LayerStackManager Commands

The following pre-packaged resource, derived from this base command, is available:

Move Layer Down


Applied Parameters: None

Summary

This feature is used to move the selected layer down in the Layer Stack within the layers of the same type.

Access

This command can be accessed from the Layer Stack by choosing the Edit » Layer Down command from the main menus or right-click on the layer then choose Move layer down. 

Use

After launching the command, the selected layer will be moved down within the layers of the same type.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: