Altium Designer Documentation

OpenPreset

Using Altium Documentation
Created: December 5, 2018 | Updated: December 17, 2018
Now reading version 20.1. For the latest, read: OpenPreset for version 21
Applies to Altium Designer versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: LayerStackManager Commands

The following pre-packaged resource, derived from this base command, is available:

Open Preset


Applied Parameters: Index=n (where n is in the range 0-9)

Summary

This command is used to select a pre-defined number and types of layers for the layer stackup.

Access

This command can be accessed from the Layer Stack by choosing Tools » Presets from the main menus then selecting the desired preset.

Use

After launching the command, the Layer Stack will display the chosen number and types of layers.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: