Altium Designer Documentation

Save

Using Altium Documentation
Created: December 5, 2018 | Updated: December 17, 2018
Now reading version 20.1. For the latest, read: Save for version 21
Applies to Altium Designer versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Parent page: LayerStackManager Commands

The following pre-packaged resource, derived from this base command, is available:

Save to PCB


Applied Parameters: None

Summary

This command is used to save the currently active Layer Stack to the PCB document.

Access

This command can be accessed from the Layer Stack in the following ways:

  • Choose the File » Save to PCB command from the main menus.
  • Use the Ctrl+S keyboard shortcut.
Use

After launching the command, the active Layer Stack will be saved to the PCB.

Tips

  1. A modified document is flagged by an asterisk suffix next to its entry in the Projects panel. A modified document also has an asterisk next to its name in its open document tab.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

Contact Us Now
We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: