Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 19.0
2120.220.120.019.119.018.118.017.117.016.116.015.1
Close
Search Search on Documentation

Manufacturing - Layer Pairs

Created: March 23, 2017 | Updated: September 26, 2019 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Now reading version 19.0. For the latest, read: Manufacturing - Layer Pairs for version 21
 

Rule category: Manufacturing

Rule classification: Unary

Summary

This rule checks to ensure that the used drill-pairs match the currently defined drill-pairs. The used drill-pairs are determined from the vias and pads found in the board. The permissable drill-pairs are defined in the Drill-Pair Manager dialog.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Constraining the Design - Design Rules. For detailed information regarding how to target the objects that you want a design rule to apply to, see Scoping Design Rules.

Constraints

Default constraint for the Layer Pairs rule.Default constraint for the Layer Pairs rule.

  • Enforce layer pairs settings - specifies whether the check is made or not.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC, Batch DRC, and during interactive routing.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Note

The features available depend on your Altium product access level. If you don’t see a discussed feature in your software, contact Altium Sales to find out more.

Content