Связаться с нами
Связаться с нашими Представительствами напрямую
The SCH Library panel enables you to peruse and make changes to the components stored in the active schematic library document. The panel also offers the ability to pass on any changes made to components in the library directly to the schematic design document, and also to define model linking for a component.
The SCH Library panel will automatically open when a schematic library is the active document in the editor. Also, when a schematic library is the active document in the editor, the SCH Library panel can be accessed by clicking the SCH button at the bottom-right of Altium Designer then selecting SCH Library from the pop-up menu.
Panels can be configured to be floating in the editor space or docked to sides of the screen. If the SCH Library panel is currently in the group of docked Workspace panels on the left, use the SCH Library tab located at the bottom of the panels to bring it to the front.
The SCH Library panel has five sections, each offering a different scope of the component parameters in the active SCH Library:
As you click on a component entry in the list, it will become the active part in the design editor window. The corresponding sections of the design editor will populate with the following information:
Both sections of the design editor window are editable, allowing you to change the symbol for the component and add, edit, or remove linked models for the component as required. Selecting a Pin object in the panel causes the corresponding graphical object to be highlighted (and zoomed) in the editor workspace. In this way the SCH Library panel offers a fast and easy way to browse, view and access SCH library components and pins.
The Model section of the editor window provides a preview image of the component's linked PCB Footprint, if defined. Use the preview's button to switch the image between 2D and 3D view modes or to select 3D model types.
The contents of the Components list can be filtered, enabling you to quickly find a particular component within the library. This is especially useful if the library contains a large number of items. Filtering can be applied using one of the two methods described in the following sections.
This filtering method uses the field at the top of the panel to filter the contents of the list. The name masking is applied based on the entry in the field. Only those components in the list targeted by the scope of the entry will remain displayed.
The filtering feature is not case sensitive and supports 'type-ahead' functionality, meaning that the content of the Components list is filtered as you type.
* wild card operator for more elaborate filtering. For example, typing
MN* will display only component footprints whose names begin with
AD. Or as in the image below, typing
*r34 will display only component footprints where the body of the name contains
This method is available for all list regions in the panel and allows you to quickly jump to an entry by directly typing within the area of the list. Masking is not applied, leaving the full content of the list visible at all times.
To use the feature for quickly finding a component footprint, click inside the Components section of the panel and type the first letter of the component footprint you wish to jump to. For example, if you wanted to quickly jump to component entries starting with the letter R, you would press R on the keyboard. The first component in the list starting with
A would be made active.
If there are multiple components starting with the same letter and especially if the library is particularly large, type further letters to target the specific entry you require. For example, typing res_ highlights the first of the RES_ series in the list.
In some situations, it may be helpful to use indirect and direct filtering simultaneously. If, for example, you know that the component you want to locate has a sub-type variant of
BRMZ and a prefix of
AD74, this information can be used as Indirect (Mask) and Direct entries respectively, as shown in the image below.
As you click on a entry in the Components list, it will become the active part in the design editor window and for the four buttons located directly beneath the list. These buttons provide the following commands that can be used with respect to the list of components:
The Aliases section of the panel enables you to define component aliases. Using aliases allows you to define a single component entry in the library and associate various component names that represent the same component yet are maybe from a different manufacturer or technology family. For example, you may have a component defined in the main list with the name SSM2135. Aliases may then have been associated to this component with the names SSM2135Z, SSM2135S and SSM2135SZ.
To create a new alias, select the main component definition in the Components section of the panel and press the Add button beneath the Aliases list. The New Component Alias dialog will appear, from where you can enter the required name for the alias component.
Double-click on an entry in the list or select the entry and click the Edit button below the list to open the Change Component Alias dialog from where you can modify the name for the alias as required.
To delete an alias, select it in the list and click the Delete button below the list.
The Pins section of the panel lists all of the pins that have been placed and defined for the active component. Each entry in the list contains the pin number, any name that has been defined for the pin, its electrical type, and where models have been linked to the component, the corresponding pin in the model that this pin maps to.
As you click on an entry in the list, the corresponding pin graphic will be centered and selected in the Symbol Editor section of the design editor window.
Double-click on an entry in the list or select the entry and click the Edit button below the list to open the Pin Properties dialog from where you can view/modify the properties of the pin.
To add a new pin from the panel, click the Add button beneath the list. The pin will appear floating on the cursor within the design editor window. Position the pin as required and click to effect placement. Continue placing additional pins or right-click or press Esc to exit pin placement mode.
To delete one or more pins, select the required entries in the list then press the Delete button. The pins will be removed from the list and deleted from the symbol's graphic.
The Model section of the panel lists all models that are currently linked to the active component. For each model link, the name of the model, its associated type, and any description is listed. You can add any number of new model links or edit/remove existing ones.
Click the Add button to open the Add New Model dialog and the subsequent PCB Model dialog, where you browse to select a new footprint model from the available libraries with which to link. Double-click an entry in the list or select the entry then click the Edit button below the list to open the corresponding model dialog associated with that model type from where you can edit the underlying model definition.
To delete one or more model links, select the required entries in the list and press the Delete button.
The Supplier section of the panel lists the physical components from a range of part suppliers that are linked to the currently selected component. Each listed supplier link provides full details of the part including the vendor, manufacturer, part number, description, and pricing. The window beneath the list shows a representative part image and its detailed parameters.
You can remove the selected link entry by clicking the Delete button. Click the Add button to open the Add Supplier Links dialog where a keyword entry is used to search all current suppliers for a suitable match.
The Components section of the panel is always displayed, however, the subsequent panel sections can be set to be displayed or hidden.
This is achieved using the associated arrow located to the right of a panel section:
Right-clicking on an entry in the Components list will pop-up a menu of commands.
The commands are as follows:
+symbol (expandable) next to them. Each part is listed as a sub-entry below.
Связаться с нашими Представительствами напрямую