Altium NEXUS Documentation

ToggleSelection

Modified by Susan Riege on Jul 21, 2018
此文档页面引用了不再受支持的产品 Altium Vault, Altium Vault 及其组件管理功能已迁移到 Altium Concord Pro

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to change the selection status of one or more design objects in the current document. The command is used to change the status for one object at a time and not a group of objects simultaneously.

Access

This command can be accessed from the PCB Editor or PCB Library Editor by:

  • Choosing the Edit » Select » Toggle Selection command from the main menus.
  • Choosing the Edit » DeSelect » Toggle Selection command from the main menus.

Use

After launching the command, the cursor will change to a crosshair and you will enter toggle selection mode. Position the cursor over an object in the design then click or press Enter to change its selection status.

Continue changing the selection status of further objects or right-click or press Esc to exit toggle selection mode.

Tips

  1. You also can toggle the selection status of a single object without affecting the status of other objects by positioning the cursor over the object then clicking (provided the Click Clears Selection option is disabled on the PCB Editor - General page of the Preferences dialog). If the Click Clears Selection option is enabled, position the cursor over the object then use Shift+click.
  2. If it is desirable to limit specific objects from being inadvertently selected, you can optionally specify that only certain objects can be selected through Shift+click operations. This setting can be found on the PCB Editor - General page of the Preferences dialog. Click the Primitives button to configure which objects require Shift to be held during selection.


Applied Parameters: None

Summary

This command is used to change the selection status of one or more design objects in the current document. The command is used to change the status for one object at a time, not a group of objects simultaneously.

Access

This command can be accessed from the PCB Editor or PCB Library Editor by:

  • Locating and using the Toggle Selection command on the Active Bar.
Click and hold on the active button to access a menu of all associated commands for that grouping. If the command has been recently used from the Active Bar, it will become the active/visible button. When other commands are available it is indicated by a triangle at the bottom-right corner of the button. 

Use

After launching the command, the cursor will change to a crosshair and you will enter toggle selection mode. Position the cursor over an object in the design then click or press Enter to change its selection status.

Continue changing the selection status of further objects or right-click or press Esc to exit toggle selection mode.

Tips

  1. You also can toggle the selection status of a single object without affecting the status of other objects by positioning the cursor over the object then clicking (provided the Click Clears Selection option is disabled on the PCB Editor - General page of the Preferences dialog). If the Click Clears Selection option is enabled, position the cursor over the object then use Shift+click.
  2. If it is desirable to limit specific objects from being inadvertently selected, you can optionally specify that only certain objects can be selected through Shift+click operations. This setting can be found on the PCB Editor - General page of the Preferences dialog. Click the Primitives button to configure which objects require Shift to be held during selection.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

联系我们

联系原厂或当地办公室

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 免费试用
Altium Designer Free Trial
我们开始吧!首先,您或者您的公司已经在使用Altium Designer了吗?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

既然您在使用Altium Designer,为何仍需要试用?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,实际上您无需下载一个试用版本。

点击下方按钮下载最新版本的Altium Designer安装包

下载Altium Designer 安装包

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

填写下方表格,获取Altium Designer最新报价。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

如果您是Altium维保期内客户,您不需要下载试用版本。

如果您不是Altium维保客户,请填写下方表格免费试用。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

您为何想要试用Altium Designer?

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

那您来对地方了!请填写下方表格申请试用吧。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。

好棒!创作是一件超酷的事情,我们可以为您提供完美的设计软件。

Upverter是一个社区导向的交流平台,专为您这样的创客量身定做。

点击这里看看吧!

如果您有任何需求,请点击这里联系获取当地办公室销售代表联系方式。.
Copyright © 2019 Altium Limited

好的,您可以下载免费的Altium Designer Viewer查看文档,有效期6个月。

请填写下方表格申请。

点击[获取免费试用],并同意我们的隐私政策。您会接收到来自Altium的资讯,并允许其改变您的通知首选项。