Electrical - Short-Circuit

Now reading version 17.0. For the latest, read: Electrical - Short-Circuit for version 21
Applies to Altium Designer versions: 16.0, 16.1, 17.0 and 17.1
 

Rule category: Electrical

Rule classification: Binary

Summary

This rule tests for short circuits between primitive objects on the copper (signal and plane) layers. A short circuit exists when two objects that have different net names touch.

Constraints

 Default constraints for the Short-Circuit rule.

Default constraints for the Short-Circuit rule.

  • Allow Short Circuit – defines whether the target nets falling under the two scopes (full queries) of the rule can be short-circuited or not. If you require two different nets to be shorted together, for example when connecting two ground systems within a design, ensure that this option is enabled.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expressions match the objects being checked.

Rule Application

Online DRC, Batch DRC and during autorouting.

 

Note

The features available depend on your level of Altium Designer Software Subscription.

Content