PCB_Dlg-LayersTransparencyFormObject Visibility_AD

Created: June 9, 2022 | Updated: June 9, 2022
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.
All Contents

The Object Visibility dialogThe Object Visibility dialog


The Object Visibility dialog is used to set a common transparency level for a particular object across different layers and set different transparencies for different objects on a specific layer. 


From the PCB/PCBLIB Editor, the Object Visibility dialog is accessed from the View Configuration panel. Switch to the panel's View Options tab, then click the Advanced button, located at the bottom-right of the Object Visibility section.



  • Layers - each individual layer may be selected in the left-hand margin by clicking on the desired layer. The entire row will need to be selected in order to toggle the transparency. Use the drop-down next to the layer's name to hide the layer if desired.
  • Objects - each individual object will be selected by clicking on the desired object. An individual entry can be selected if you'd like to only modify the transparency of this object on a specific layer.
The margins may be resized by resting your cursor on the line that divides the object columns. The cursor will change to a double-sided arrow, which you may drag while holding to alter the column sizes.

Transparency Controls

  • Only show used layers - check this box to only display layers that have been used in the design.
  • Transparency for selected - drag this bar to set the desired transparencies for the select object rows or layer columns.
  • Percentage - use this box to manually type in the desired transparencies for the selected object rows or layer columns.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: