Altium NEXUS Documentation

Sch_Dlg-JunctionManualConvertingFormJunctions Conversion_AD

Created: February 7, 2019 | Updated: February 7, 2019
Applies to Altium NEXUS Client versions: 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5
This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer (with Altium Designer Enterprise Subscription) and a connected Altium 365 Workspace. Check out the FAQs page for more information.

The Junctions Conversion dialog
The Junctions Conversion dialog


The Junctions Conversion dialog includes controls to change how junctions appear in schematic documents. 


The dialog is accessed from the schematic editor by clicking Tools » Convert » Convert Cross Junctions from the main menus.



  • Sheet Scope - choose one of the following options to determine the scope of the update:
    • Current Document - update the active schematic document only with changes to its current template.
    • Project Documents - update the active schematic document as well as all other schematic documents in the active project with changes to their respective current templates. Schematics that are currently closed will be opened.
    • Open Documents - update the active schematic document as well as all other open schematic documents (regardless of parent project) with changes to their respective current templates.
  • Selection - use the drop-down to choose the desired objects of the scope:
    • Selected Objects - select only the objects that are selected in the chosen sheet(s) from Sheet Scope.
    • All Objects - select all objects in the selected sheet(s) from Sheet Scope.


  • Miter Size - enter a value to define the size of the miter.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: