Altium NEXUS Documentation

ToggleExplorerView

Created: October 6, 2017 | Updated: February 19, 2019

Parent page: VersionControl Commands

The following pre-packaged resource, derived from this base command, is available:


Applied Parameters: None

Summary

This command is used to switch between the two different viewing modes (Classic View and Combined View) for the Storage Manager panel.

Access

This command can be accessed from the Storage Manager panel in the following ways:

  • Combined View - right-click in the Time line region of the panel and choose the Switch to Classic View command from the context menu.
  • Classic View - right-click in the Local History or VCS Revisions region of the panel and choose the Switch to Combined View command from the context menu.

Use

After launching the command, the Storage Manager panel will be configured to present in its Classic View or Combined View, depending on the previous view in-force:

  • Classic View - where VCS and History events are shown in separate regions (VCS Revisions and Local History).
  • Combined View - where combined VCS/History events are shown in a single region (Time line).
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: