Variant Printing in Schematic from Output Job

Created: March 25, 2021 | Updated: July 8, 2022

Variants Not showing on the schematic prints when generated through output job.

Starting in Version: 18.0
Up to Version: Current

Solution Details

Selecting the [Project Physical Documents] in the output job will show the compiled sheet of the schematic. Including the different variants for the sheets. 

output.png

The term "Project Physical Documents" refers to the physical or compiled view of the schematics.  When setting the Data Source for the Schematic Prints output, All SCH Documents relates to the printing of the set of all logical schematics in the project (the raw, uncompiled "Editor" view of each schematic).  To print the set of all physical schematics in the project (the compiled document view(s) of each schematic), be sure to set the Data Source to [Project Physical Documents].

Here's documentation with more detail:
https://www.altium.com/documentation/altium-designer/preparing-multiple-outputs-in-an-outputjob-ad
Was this article helpful?
0
0
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: